Help with Amp Wiring

[bzubke1]

The Kicker requires 8ga power and ground wires, the Rockford requires 4ga. Not sure what size power wire you would want to use from the battery/battery switch but I would think 2ga is big enough.. Something like this should get the job done. http://www.sonicelectronix.com/item_...er-SHD820.html

[MLA]

Ah, I have two.

Kicker zx200.4
Rockford Fosgate p500-2

CnS,

How many speakers do you have on the zx200.4 and is the p500/2?

Also, what is the distance from the battery to where you intend to mount a distro block?

Depending on a couple of factors, you have some options. You have trunk line and a main point of circuit protection right off the battery, then use a pair of non-fused blocks close to the amps to split off. Or, come right off the battery with a fused distrobution block, like what is linked above, the use a single non-fused block on the GND side. Or, use a fused/GND combo block.

[Cigars n scotch]

Thanks. It says it requires 2 midi style fuses. What amperage do I get? I have 100amp fuses on the RF AMP.

[Cigars n scotch]

Goodness MLA, you're speaking Chinese to me!

On the kicker I have 6 in cabins, and for the Rockford I have 2 WS Pro80s.

The battery is no more than a foot away.

Here's a picture of my observers seat compartment where everything is. The inside wall to the right of the battery is where the switch and distro block would go

ImageUploadedByTapatalk1335379758.415632.jpg

[bzubke1]

I believe you would get whatever size fuse the amplifier requires. That information should be in the manual for the amp.