Results 21 to 25 of 25
Thread: Help with Amp Wiring
04-25-2012, 03:03 PM #21
The Kicker requires 8ga power and ground wires, the Rockford requires 4ga. Not sure what size power wire you would want to use from the battery/battery switch but I would think 2ga is big enough.. Something like this should get the job done. http://www.sonicelectronix.com/item_...er-SHD820.html-2012 Supra Launch 21V
-2008 Mobius LSV
04-25-2012, 03:36 PM #22
How many speakers do you have on the zx200.4 and is the p500/2?
Also, what is the distance from the battery to where you intend to mount a distro block?
Depending on a couple of factors, you have some options. You have trunk line and a main point of circuit protection right off the battery, then use a pair of non-fused blocks close to the amps to split off. Or, come right off the battery with a fused distrobution block, like what is linked above, the use a single non-fused block on the GND side. Or, use a fused/GND combo block.
04-25-2012, 03:45 PM #23
Thanks. It says it requires 2 midi style fuses. What amperage do I get? I have 100amp fuses on the RF AMP.2008 Supra 21V-Currently For Sale
04-25-2012, 03:49 PM #24
Goodness MLA, you're speaking Chinese to me!
On the kicker I have 6 in cabins, and for the Rockford I have 2 WS Pro80s.
The battery is no more than a foot away.
Here's a picture of my observers seat compartment where everything is. The inside wall to the right of the battery is where the switch and distro block would go
ImageUploadedByTapatalk1335379758.415632.jpg2008 Supra 21V-Currently For Sale
04-25-2012, 03:53 PM #25
I believe you would get whatever size fuse the amplifier requires. That information should be in the manual for the amp.
Last edited by bzubke1; 04-25-2012 at 03:56 PM.-2012 Supra Launch 21V
-2008 Mobius LSV