Results 21 to 30 of 42
Thread: Putting stuff back in the boat
-
04-23-2012, 07:38 PM #21
You def made the right decision in mounting underneath!
2006 Supra 20 - Sold
2006 Supra 24 Gravity Games - Sold
2015 Supra SE450 - Sold
-
04-23-2012, 07:48 PM #22
Good call
Sent from my iPhone's cooler than your droid utilizing TapatalkJason
Go Hard or Go Home.......it's MOOMBA time!!
2009 Moomba Mobius LSV
-
04-24-2012, 09:19 PM #23
3 down 1 to go
past---------------2003 Outback SOLD
present------------2006 Supra Launch 21V
Ron
-
04-24-2012, 11:00 PM #24
Looking good Ron, gonna sound even better
Jason
Go Hard or Go Home.......it's MOOMBA time!!
2009 Moomba Mobius LSV
-
04-25-2012, 09:34 AM #25
Hope I'm not too late but I've been away. When I replaced all the vinyl in my Outback a few years ago I had a guy make the covers but I did all the installation. The back of the back seat was the hardest part. I thought he cut it wrong or something. He told me to use the hair dryer and stretch a little. It worked great! I was amazed at how a little heat helped the vinyl take the shape of the curved backrest and the inside corners. So, I thought' I'd mention that you might want to take a hair dryer to the vinyl and just heat it up a bit as you stretch it. Don't have to go crazy but it will start to take the shape you need. Good luck. Again, hope I'm not too late.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
04-25-2012, 09:59 AM #26
Looking good. I definitely agree with cans underneath. Gonna have a whole new boat this year!
2016 Moomba Mojo
2006 Supra 24SSV - Traded
-
04-25-2012, 10:11 AM #27
Appreciate the input, but I'm bringing the boat to the vinyl guy and he can fix what he screwed up. He knew there might be a problem with the curved pieces. He could have cut the material and not attached them perminantly to the plastic, and I could have brought the boat to him in the spring.
Actually the back of the back seat turned out fine.past---------------2003 Outback SOLD
present------------2006 Supra Launch 21V
Ron
-
04-25-2012, 12:09 PM #28
I'm in the process of doing mine and what I found is that the backrest actually flatten out without the covers on them and as soon as you put it back in they compress again causing the wrinkles. I used a rope across seat backs to get the proper curvature before I stapled the cover on.
-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
-
04-25-2012, 09:49 PM #29
Bummer. One tower speaker left to go and it's too cold to work on the boat again. On a good note, while driving to check some stuff in my trailer I noticed that the public docks on the river are in. They never got put in last year due to high water levels until September.
past---------------2003 Outback SOLD
present------------2006 Supra Launch 21V
Ron
-
04-26-2012, 10:22 PM #30
Hey Ron why the mix of Krypt and Exile?
-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"