Results 1 to 10 of 42
Thread: Putting stuff back in the boat
Hybrid View
-
04-16-2012, 09:40 AM #1
Putting stuff back in the boat
1. Vinyl
2. Speakers
3. Re-wiring tower for speakers.
On a 2003 outback does anyone know if the cross member pieces between the tower tubes are hollow? The existing wiring comes up inside the forward tube and then is exposed to get to the previous tower speakers. I would like to conceal all of the wiring.
Pics will be coming. It's just got to stay warm long enough for me to make some progress.
I've already had a snag with the vinyl. There are 3 curved pieces at the front of the boat and as they are installed I found that they tended bend inwards causing the vinyl to ripple. What I'll have to do is re-stretch these pieces. I'll probably wrap something around them, tighten to the same ripple effect and then re stretch.past---------------2003 Outback SOLD
present------------2006 Supra Launch 21V
Ron
-
04-16-2012, 01:35 PM #2Banned
- Join Date
- Oct 2005
- Location
- Durham, NC
- Posts
- 649
They are all hollow. One of mine must have gotten water in it at some point and froze; it is "puffed" up a bit. I have my tower speakers installed on the front cross bar, they are a little more tucked up in the tower and away from knocking my head on them. Also, when I installed my bimini, I had to drill mounting holes into them.
I have replaced that front vinyl as well, and it can be a pain. I tried to keep the pieces in a curve while I installed the vinyl to help reduce the ripples.
-
04-16-2012, 05:28 PM #3
-
04-16-2012, 08:25 PM #4
You will have to drill extra holes, the round tower rubes are solid where the cross member connectes. The cross member is hollow. When i did this to my LSV last year you have to drill a hole from the outside of the front tube, threw the back side of that same tube to get into the center of the cross member. You have to do the same with the back tube.
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
04-16-2012, 08:49 PM #5
Great burst my bubble. Just went out to the boat and looked. Funny how something so obvious will get missed by one set of eyes.
I got three cross members on the top. I was thinking, once it warms up, up here, the center cross member. Did you go another route?
At least it makes fishing the wire really easy.past---------------2003 Outback SOLD
present------------2006 Supra Launch 21V
Ron
-
04-17-2012, 12:18 PM #6
I used the center cross member. Easier to fish that way
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
04-21-2012, 10:07 PM #7
Good catch on the Christmas lights. Might as well leave them up now, it's nearly Christmas time again
Sent from my android eating iPhone using TapatalkJason
Go Hard or Go Home.......it's MOOMBA time!!
2009 Moomba Mobius LSV
-
04-21-2012, 10:21 PM #8
-
04-21-2012, 10:34 PM #9
Baby Jesus loves that you continue to celebrate his birth! Your neighbors, eh not so much. FWIW - my HOA would have fined me about $2k by now.
-
04-23-2012, 07:25 PM #10
Looks like the cans are going under the tower. Just finished drilling and fishing.
This isn't complete. I need to ream out the hole in the boat and find a suitable sleeve for the wiring.
past---------------2003 Outback SOLD
present------------2006 Supra Launch 21V
Ron