Results 1 to 8 of 8
Thread: Prop from acme
-
11-24-2017, 06:46 PM #1Junior Member
- Join Date
- Apr 2017
- Posts
- 20
Prop from acme
What prop should I get from acme for 2016 moomba mondo with 3,500 lbs of ballast .Not worried about top end mainly surf .Having trouble getting up to speed when full of ballast and people .
-
11-25-2017, 09:25 AM #2
Two pieces of the puzzle I always like to have before making a prop req, is lake elevation of the lake you typically frequent and what is the current prop. Knowing the starting point helps gauge the degree of upgrade needed.
-
11-25-2017, 10:59 AM #3Two pieces of the puzzle I always like to have before making a prop req, is lake elevation of the lake you typically frequent and what is the current prop
-
11-26-2017, 09:42 AM #4Junior Member
- Join Date
- Apr 2017
- Posts
- 20
Prop was upgraded to surf addition not sure what it is for sure .I live in ohio so elavation is not much of a factor.
-
12-07-2017, 10:34 PM #5Junior Member
- Join Date
- Apr 2017
- Posts
- 20
My prop is a OJ 14.50 by 14.25 what are some good upgrade options .
-
12-07-2017, 11:07 PM #6
A 14.5 D x 14.25 P is a very solid performing prop. Going down to a 13.75 P like the ACME 1615 would be a step up in aggressiveness. However, id measure to hull and the trailer prop guard to see if a 15 D will fit. The added surface area from the increase in diameter helps offset the RPM increase that comes with a drop in pitch only.
-
12-14-2017, 09:18 PM #7Junior Member
- Join Date
- Apr 2017
- Posts
- 20
Going with a acme 2775 after talking to acme .
-
12-14-2017, 09:51 PM #8