Results 1 to 6 of 6

Thread: Boat top end

  1. #1
    Join Date
    Dec 2004
    Location
    Cinci-Dayton
    Posts
    1,014

    Default Boat top end

    I'm runnnig my 05 LSV at 41 mph and 4100 rpm with the throttle fully pressed (325 hp MPI). This is lower than the max spec but the same as I expected based upon boat mag boat reviews. Does anyone get up to the max 4800 rpm that the engine is rated IAW the manuals SC says top end is 4600 rpm, Indmar says 4800 rpm?

    While I'm asking stuff, how exactly do you do what I've heard called a bat turn, you yank all the way around 180 and the boat comes to a stop inside the straight away wake.

    Off to tennis, then swim team meet. I'll be home by 9 pm - IF I'm lucky.
    Naked red and white 2005 Moomba LSV
    Teaching my kids to Ride, Shoot Strait and Tell the Truth

  2. #2
    Join Date
    Dec 2004
    Location
    Cinci-Dayton
    Posts
    1,014

    Default Replying to Topic 'Boat top end'

    Do you recall the RPMs?

    SD2
    Naked red and white 2005 Moomba LSV
    Teaching my kids to Ride, Shoot Strait and Tell the Truth

  3. #3
    Join Date
    Mar 2005
    Posts
    109

    Default Replying to Topic 'Boat top end'

    Ive heard it called a powerslide, and I have also heard people say not to do it because of possible damage to the fins. I dont know for sure how to do it, but good luck in your adventures!

  4. #4
    Join Date
    Aug 2004
    Location
    Lake Hickory, North Carolina
    Posts
    1,390

    Default Replying to Topic 'Boat top end'

    In addition, I don't think you'd want to do it with a tow rope in the water either.
    Learn all you can today. Tomorrow you may need to know it!
    .
    2004 Moomba Outback. Tower Speakers, amp, ballast, ssrr ... she's a cutie!

  5. #5
    Join Date
    Dec 2004
    Location
    Cinci-Dayton
    Posts
    1,014

    Default Replying to Topic 'Boat top end'

    At least not with your mother-in-law driving.
    Naked red and white 2005 Moomba LSV
    Teaching my kids to Ride, Shoot Strait and Tell the Truth

  6. #6
    Join Date
    Jan 2005
    Location
    Alabaster, Alabama
    Posts
    143

    Default Replying to Topic 'Boat top end'

    I was told that if you run the boat wide open, start your turn, then cut the throttle, and cut the wheel hard. You should spin. Let me know how it goes.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •