Results 101 to 110 of 167
Thread: 2012 Stereo Re-Build...
-
03-29-2012, 02:36 PM #101
LOLz good one Berg!!
PWI as usual...
-
03-29-2012, 02:47 PM #102
That's what Ian is going to look like when he gets his ear next to those new blue speakers.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
03-29-2012, 03:21 PM #103
Did you go with spots this time around or floods on all 3?
looks like this years order the casing is a little darker grey than the first set on group buy!
2007 Moomba Outback - going, going, GONE
2015 "NOT A MOOMBA"
Why Not? Play Hard! Get wet
-
03-29-2012, 03:42 PM #104
The 2 new ones are floods, and the existing is a spot. I couldn't determine if the new cases are darker, or if the old one is faded.
2013 Outback V
-
03-29-2012, 04:47 PM #105
A guy on the Supra forum brought up the color issue as well. I talked to Darric and he told me they changed the finish since the first group buy. Like you say, its all under water anyway.
PWI as usual...
-
04-02-2012, 04:21 PM #106
I put a little time into the trim plate to cover the sub enclosure this weekend, here is what I came up with;
I made the faceplate out of 1/4" Starboard - I didn't like the way it came out around the corners, I should have rounded them rather than going squared off, not sure what I was thinking there;
So, I decided I'd make an acrylic trim ring, to be illuminated with blue LEDs, just like the cabin speakers.
Clear, rough cut to size;
I used a router to round the edges;
And then lots of sanding. I ordered the LED strip online, once it arrives I'll cut out the center and get this aspect of the project wrapped up;
2013 Outback V
-
04-03-2012, 01:16 AM #107
So everytime I has up and it comes back out of the filler neck I don't do anything. Just never worried about it. Does this negatively affect the gel coat or something?
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
04-03-2012, 09:04 AM #108
You should try to wash it off or at least wipe it off. It evaporates pretty quickly on days it's nice enough to be putting gas in the boat though.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
04-03-2012, 10:32 AM #109
I think it will take any wax right off the boat but you would need extended saturation to damage the gel.
-
04-03-2012, 02:27 PM #110
You're making me jealous Ian! Keep up the good work, can't wait to see those LED's in the water and I love the unique placement of the tower cans. Where did you pick up the acrylic for the LED sub enclosure trim?