Page 1 of 3 123 LastLast
Results 1 to 10 of 27
  1. #1
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default Tower Camera Mod

    Does anyone know the diameter of the tow pylon on the tower?
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  2. #2
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    At what point? I have the boat right outside in the garage.
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  3. #3
    Join Date
    Aug 2010
    Location
    Acworth, GA
    Posts
    1,223

    Default

    So what's the MOD?
    Kraig - 2010 Outback V

  4. #4
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default

    Kane, the widest point, not the plastic narrow spot where the rope attaches
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  5. #5
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    David, I tried to get a pic of it with the tape measure but it didn't work out too well. Here's the efforts so you know what part I measured. When I put the phone (camera) down and started from the 1" mark instead of the crappy end hook, I accurately measured 1 7/8".

    Attached Images Attached Images
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  6. #6
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    Oh crap, you said "widest point". I forgot how to read, I guess. Gimme a minute.
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  7. #7
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    OK, the widest part of the metal is the "cap" on top and it measures 2 1/2". But, the plastic rope saver swivel ends, not the middle part but the spool ends if you will are slightly wider so they measure about 1/16" more. If I had to slip something over the top of the whole thing it would need to be about 2 9/16", at least on mine.

    You can see it in the pic I blew up above. Look how the white plastic protrudes beyond the metal a little bit. I hope this helps.

    Edit: Actually the very top of the first pic shows it the best.
    Last edited by kaneboats; 02-14-2012 at 11:39 AM.
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  8. #8
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default

    2 5/16 or 2 9/16? If the top cap is 2 1/2 and the plastic sticks out another 1/16 inch I would think 2 9/16 or 2 5/8
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  9. #9
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    What are you talking about? I said 2 9/16". Check for yourself. But, you are right. 2 5/8" would be safe to allow for it on both sides if you were slipping something over the top.
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  10. #10
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default

    Now the issue is I don't think they sell 2 5/8 PVC. May have to try a collar for 2 1/2 and see I that will slide over
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •