Results 1 to 7 of 7

Thread: Amp Setups

  1. #1

    Default Amp Setups

    Curious how everyone set up thier amps. Just a board across the 2 support stringers in the storage area and attach them to that? Stereo should be coming in shortly so I'm trying to figure out my set up.
    2014 Mondo
    Ski Lockers - 1000# customs
    750 IBS

  2. #2
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    1,131

    Default Amp Setups

    2014 LSV. Javelin on top powering cabins and sub. XM30.2 on bottom powering four SXTQ9's.

    Joe

    2014 LSV
    2010 Outback V - Sold
    1993 Echelon

  3. #3
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    Old School Exile.

    Harpoon to run 4 XM9s
    800.4 to run 2 XM9s
    800.4 to run 6 Exile cabins
    2500.1 to power Exile Big 15 sub
    Custom rack, amps have cut outs in the rear for cooling.
    2 6V Golf Cart batteries to power it.



    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

  4. #4

    Default

    Nice setups....very clean...so what did you attach your boards to and how?
    2014 Mondo
    Ski Lockers - 1000# customs
    750 IBS

  5. #5
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,680

    Default Amp Setups

    ImageUploadedByTapatalk1421411119.370148.jpg

    Xi800.4 power 6 SX65-Ms

    2 XM30.2's - one powering a pair of XM9s, the other power a pair of SXT9s

    Xi1500.1 powering 2 Kicker S10L7s (this is not pictured, it's mounted to the back of the bow seat)


    My boat is .375" Starboard, and I just screwed it flat to the air intake tunnel. Hasn't moved yet
    2013 Outback V

  6. #6
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    1,131

    Default Amp Setups

    The Moomba's come from the factory with a pair of glassed in and carpeted braces behind the observer seat along the port side wall. That is where the stock amp board screws too. Most people do the same when using different or larger boards. Simply screw through the board and into the braces with four to six #12 X 1.5" stainless screws.
    Joe

    2014 LSV
    2010 Outback V - Sold
    1993 Echelon

  7. #7

    Default

    Quote Originally Posted by jstenger View Post
    The Moomba's come from the factory with a pair of glassed in and carpeted braces behind the observer seat along the port side wall. That is where the stock amp board screws too. Most people do the same when using different or larger boards. Simply screw through the board and into the braces with four to six #12 X 1.5" stainless screws.

    Thanks, that's what I was thinking, just wanted to make sure before I started driving screws.
    2014 Mondo
    Ski Lockers - 1000# customs
    750 IBS

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •