Results 1 to 3 of 3

Thread: Carpet Trim

  1. #1
    Join Date
    Jul 2011
    Central Wisconsin

    Default Carpet Trim

    Has anyone had any experience replacing the trim in their boat that attaches to the fiberglass? The stress on it has caused ours to pull away in one spot, plus it looks like crap. Attached is the only picture I have of it, but it gives you an idea of what needs replacing. Thoughts on where to purchase? We haven't checked with the dealer yet as we likely can handle this mod
    2000 Mobius V
    Monster Tower MT2 - 750 rears, GG 1180 center - PP Wakeboard Edition

  2. #2
    Join Date
    Oct 2005
    Durham, NC


    Mine was letting go in the corners. So I pulled it all off the other year to redo it. I cleaned mine up with some bleach solution, which worked pretty good. To put it back on, I used automotive grade foam tape, which was the same stuff they put it on with at the factory. Mine went back on pretty well, but darned if it hadn't shrank and was about 1.5" too short to make it all the way around.

    Be careful when removing it, though. Mine was still securely attached in one spot and it ripped the gelcoat off and damaged the fiberglass. Oops.
    Brian Roberts
    2001 Outback DD

  3. #3
    Join Date
    Nov 2010
    Katy, TX


    mine had gaps in the corners where it makes the u in the bow. i try to ignore it

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 paid Wetsounds XS650M and Wetsounds WS12 powered by SD6 all controlled by a WS420.

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts