Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22
  1. #11
    Join Date
    Mar 2010
    Location
    Arkansas
    Posts
    3,952

    Default

    Quote Originally Posted by DOCDRS View Post
    They should last 350-500+ hours depending on alignment and cool water housing cooling. If you can align your shaft you can do the conversion. It sure is nice to have a dry and clean bilge imo.
    I'm around 430 so that makes sense!

    Sandm, I'm actually running back up to the dealers today and I'll double check what he told me.
    2016 Moomba Mojo
    2006 Supra 24SSV - Traded

  2. #12
    Join Date
    Jan 2010
    Location
    North Texas
    Posts
    2,844

    Default

    Quote Originally Posted by KG's Supra24 View Post
    I'm around 430 so that makes sense!

    Sandm, I'm actually running back up to the dealers today.
    Smh smh smh

    Sent from Galaxy S2 using Tapatalk.
    2006 Supra 20 - Sold
    2006 Supra 24 Gravity Games - Sold
    2015 Supra SE450 - Sold

  3. #13
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    3,034

    Default

    If you're looking for some dripless underwear, KG's mom has an extra pair or two!


    PWI as usual...

  4. #14
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default

    Quote Originally Posted by DOCDRS View Post
    They should last 350-500+ hours depending on alignment and cool water housing cooling. If you can align your shaft you can do the conversion. It sure is nice to have a dry and clean bilge imo.
    pretty sure my shaft seal is not leaking and my bilge is NEVER dry do to people climbing in and out of the boat dropping with water all the time.

    i was never able to align my shaft due to the engine just wouldnt move. ill pay the dealer to try this winter
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  5. #15
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,259

    Default

    Quote Originally Posted by rdlangston13 View Post
    pretty sure my shaft seal is not leaking and my bilge is NEVER dry do to people climbing in and out of the boat dropping with water all the time.

    i was never able to align my shaft due to the engine just wouldnt move. ill pay the dealer to try this winter

    Persuasion my friend is best accomplished with a crow bar and hammer taping
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  6. #16
    Join Date
    Mar 2010
    Location
    Arkansas
    Posts
    3,952

    Default

    Dealer here said the system was $150 and then 1.5 to 2 hours of labor.

    Sent from my Xoom using Tapatalk
    2016 Moomba Mojo
    2006 Supra 24SSV - Traded

  7. #17
    Join Date
    Mar 2003
    Location
    Springfield Missouri
    Posts
    3,391

    Default

    I went to a graphite cord about seven years ago and haven't done a thing with it since and no dripping. Teflon is more prevalent now.
    1998 Mobius
    310 HP PCM
    SOLD

  8. #18
    Join Date
    Jun 2008
    Location
    Henderson, NV
    Posts
    7,020

    Default

    Quote Originally Posted by KG's Supra24 View Post
    Dealer here said the system was $150 and then 1.5 to 2 hours of labor.
    so $3-400 depending on shop labor rates.
    I'm all about the dyi, but aligning the engine is something that I'd rather pay for as I would assume the repricussions of it being wrong are quite expensive
    '06 Supra Launch 20SSV-gone but never forgotten

  9. #19
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default

    Quote Originally Posted by DOCDRS View Post
    Persuasion my friend is best accomplished with a crow bar and hammer taping
    i used persuasion in the form of a 4 foot pry bar and a 3 lb sledge and got nothing
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  10. #20
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,259

    Default

    Quote Originally Posted by rdlangston13 View Post
    i used persuasion in the form of a 4 foot pry bar and a 3 lb sledge and got nothing
    with the pins loose prying on the motor mount as you tap the trunnion it did not move? something does not sound right
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •