Results 21 to 30 of 46
Thread: my latest mods for wiinter 2011
-
12-07-2011, 11:39 AM #21
I've mounted plenty there before np. There's a piece of 3/4" plywood glassed into the structure for rigidity the best I can tell. When i re-did mine I made and carpeted a panel that fits that space and mounted it to the wall 1/2" off. I then mounted all my goodies to the panel, minimized drilling there and worked well.
IMG_4288.jpg IMG_4309.jpg2007 Mobius LSV
-
12-07-2011, 11:48 AM #22
Yep, echo what they said. It can be done.
My first year I mounted 2 amps directly to the wall. This past year we (Dusty and I, mostly Dusty) rigged up a panel like Razz and then we mounted it to the wall.
My setup
Dustys newest ... it seems to be able to handle the weight cause he has alot on it now
Last edited by KG's Supra24; 12-07-2011 at 11:55 AM.
2016 Moomba Mojo
2006 Supra 24SSV - Traded
-
12-07-2011, 02:12 PM #23
KG or Dusty, in looking at your setups I dont see fuses, am I missing it or are you amps not fused?
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
12-07-2011, 02:15 PM #24
-
12-07-2011, 02:20 PM #25SOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
Tow Rig:
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
-
12-07-2011, 02:23 PM #26
-
12-07-2011, 02:49 PM #27Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
12-07-2011, 02:51 PM #28
Here ya go, I absolutely love it. Don't forget the fuses to go along with it! This little item will def. help the "clean-ness" of your install!
http://www.sonicelectronix.com/item_...TPFDB-4PG.html2006 Supra 20 - Sold
2006 Supra 24 Gravity Games - Sold
2015 Supra SE450 - Sold
-
12-07-2011, 02:52 PM #29
If you already have non-fused distro block(s) you may consider going with circuit breakers instead. See Raz's example. I went that route. If by chance it ever pops there's no disassembly require to get a new fuse put in there. (moving gear, people, etc) Just reset and go.
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
12-07-2011, 03:07 PM #30