Results 1 to 5 of 5
Thread: Wakeplate Question
-
09-01-2011, 03:54 AM #1Junior Member
- Join Date
- Sep 2008
- Posts
- 25
Wakeplate Question
08 LSV, Reference picture. Is this in the all the way down position? (because that is as far as it will go)
-
09-01-2011, 03:57 AM #2
yup thats as fare as it goes. it goes slightly lower then the rear of the boat. And when you put it up it only goes about 2 inches up.
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
09-01-2011, 12:01 PM #3Member
- Join Date
- Jul 2011
- Posts
- 76
I have a 2000 mobius V with a wakeplate that looks just like this and I don't understand what it is meant to be used for. When I lower it down to 50% I have a hard time seeing any noticeable difference, except that it seems at 100% the boat planes out a bit better... what is the reason to set it to anything less than 100%?
2000 Mobius V
-
09-02-2011, 05:05 AM #4Junior Member
- Join Date
- Sep 2008
- Posts
- 25
bret, I think it's purpose is to shape the wake. When mine is all the way down, the wake is noticeably steeper with a sharper edge. It's real handy if you're wakesurfing too, cleans the wave up and gets alot of the washout gone.
-
09-02-2011, 10:12 AM #5Member
- Join Date
- Jul 2011
- Posts
- 76
Ok so all the way down is probably 100% and all the way up is 0%... I'll have to maybe try it at 0% this weekend as I am still a beginner.
2000 Mobius V