Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32
  1. #1
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,259

    Default Anyone wanna see me rebuild my blown seadoo 951 di

    Like the title shows, taking on a new project just cause I have so much time on my hands. Was out for a sunday morning ride and she was purring like a kitten at 50 mph when all of a sudden she went to sleep never to awaken. Because I own a compressor, a few air tools, and a keen sense to know how things work I'm diving in. I back her into the garage plug the comp in and bam shes apart
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  2. #2
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,259

    Default

    The seat off , spark plugs exposed, should I continue? am I over my head already?


    DSCF0798 by docdrs, on Flickr
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  3. #3
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,259

    Default

    Oops , spark plugs removed, fuel rail removed, rave valves removed
    .DSCF0800 by docdrs, on Flickr

    parts sitting on the floor not looking too bad, or is it?


    DSCF0802 by docdrs, on Flickr

    Dirty and Chipped Rave valve.......could this mean trouble?


    DSCF0824 by docdrs, on Flickr
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  4. #4
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,259

    Default

    Head bolts loosened

    DSCF0805 by docdrs, on Flickr

    some cowling parts removed, head bolts out


    DSCF0806 by docdrs, on Flickr
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  5. #5
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,259

    Default

    Head removed


    DSCF0813 by docdrs, on Flickr

    Underside of head... look the same


    DSCF0822 by docdrs, on Flickr

    Top of cylinders, right one looks as tho it may have been a little hotter, or lean, but why???? Oh gratuitous pic of air tool to save my wrists undoing jug bolts


    DSCF0816 by docdrs, on Flickr
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  6. #6
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,259

    Default

    Jugs removed , uh oh what have I found


    DSCF0817 by docdrs, on Flickr

    A hole in the right piston and massaged rings , now i know why that rave valve looked knarled
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  7. #7
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,259

    Default

    Pistons removed and UH oh I dropped a wrist pin coller and some roller bearings as I removed the first piston
    Where did they go? Into the crankcase.......most likely


    DSCF0818 by docdrs, on Flickr


    DSCF0820 by docdrs, on Flickr
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  8. #8
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,259

    Default

    Yep they were in the crankcase.....all parts accounted for 4 wrist pin collars and 72 roller bearings


    DSCF0825 by docdrs, on Flickr
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  9. #9
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,259

    Default

    The sleeve in the jug was scored, so off to the machine shop to get straightened, bored and oversized.....looks like .02 over so pistons are ordered and on their way..... should be here tomorrow for final sleeve honing and fitting .......hopefully I can start the reassemble process wednesday......maybe on the water for the weekend note on cleaning of the crankcase good oil flow was noted into the case so hopefully it was just old age that blew the piston
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  10. #10
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    Nice work, i thought you were asking a question waiting for responce then i opened the thread and realised it was one of them questions your asked but really have no say in the matter. Its already been done LOL.

    Nice work man. Im intrested to see how it all turns out.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •