Results 1 to 10 of 14
Thread: Vobration noise
-
06-26-2011, 09:03 PM #1Junior Member
- Join Date
- Jun 2011
- Posts
- 2
Vobration noise
I recently purchased a 2008 LSV and just took the boat out for the first time this weekend. When driving at 10 - 20 mph I noticed a vibration / noise coming from about 1.5 - 2 feet in front of the vdrive unit. Is this common for this type of boat. This is my first inboard boat.
The noise does not sound mechanical but more like it is coming from the hull of the boat. Not sure if it is related to how everything is mounted or what. The sound seems to be coming from under the two deck panels in the floor of the boat. I believe they are above the gas tank. Can someone provide me some insight into what the noise may be. Thanks!
-
06-26-2011, 09:46 PM #2
What prop do you have?
If it is OJ 14.25x14... that's probably the culprit..
do some searches on here..
Is it a growl? fine vibrations... not real coarse? probably the prop..
Many of us have been switching to the ACME props for this reason..
Acme 1235, 1433 and 1847 ( i just put the 1847 on my 06 LSV) major reduction in vibration..
check a few things.. look at prop for any dings, etc.... eye the shaft to make sure it is not bent any..
only oddity is you mention 1.5-2' in FRONT of the V Drive unit.. hmmm
There are several threads on the OJ Prop.. Eric from OJ chimed in for a bit. says something about the prop needing to be cut down to 14x14 and recupped due to its fit on the LSV hull.. I take issue with that ... since it was the factory upgrade prop..
by your description, i am curious if you took the boat on a test drive? did it make vibration then? if no test drive, ask the prev owner if you can..
where are you located?
WElcome to the forumBrad
2011 Launch 21V Sold... boatless replaced with a Jeep JKUR
2006 Moomba Mobius LSV sold
2004 Outback sold
-
06-26-2011, 09:55 PM #3
my 08 lsv has the oj wakeboard prop and has the same issue. as soon as i can come up with 500 bucks i will be getting an acme 1847
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
06-27-2011, 01:18 AM #4
Welcome to the forum, post some pics of your lsv
Jason
Go Hard or Go Home.......it's MOOMBA time!!
2009 Moomba Mobius LSV
-
06-29-2011, 09:48 AM #5
The reduction of diameter, from 14.25 to 14 will help with the noise, 2 of the 3 Acme props mentioned are 14". We also offer the same 14 X 14 and 14 X 14.5 for the LSV.
Eric Johnson
Johnson Propeller Co., Inc
OJ PROPS 800-359-9730
-
06-29-2011, 09:58 AM #6Member
- Join Date
- Jul 2010
- Location
- Deep River Ont
- Posts
- 83
Hey Eric, is there somewhere in Ontario Canada, specifically the Ottawa area, where i could get prop repair that you know of??
2008 xlv gg 340hp
-
06-29-2011, 10:03 AM #7
-
06-29-2011, 10:22 AM #8
My Mobius Lsv did that too till I had the prop redone.. Now is is smooth..
Oh and welcome to the forums.. We do need pics though2009 Moomba LSV..Kenwood Head unit Kicker subs and 4 wet Sound tower speakers..3 kicker amps.. Green and Black ( green like the payments black like my eye when i brought it home ) lol J/K
-
06-29-2011, 11:47 AM #9
I had my prop done in at prop shop in Kingston and they took 6 hours to make the prop even worse than what it was when I dropped it off.
I then sent it to Kawartha Prop Repair and they did a perfect job.
http://www.buckhornyachtharbour.com/prop.php
You can meet the mobile van in the parking lot at Hurst Marina to give them the prop, then you can meet them again at the same location 7 days later and they dont charge for shipping!2008 Outback V - gravity III ballasts, perfect pass star gazer, hydraulic wake plate, depth finder, water stainer, rad-a-cage tower, board racks, tower mirror, bimini top, audio package d, graphics package e, appearance package, cockpit & tonneau cover, mooring cover, black stainless rubrail, docking lights, OJ 14.25x14.0 prop.
Toys: Ronix Viva 136 with Kai bindings, Phase5 Drew Danielo Pro, Straight Line Sumo Sac 750lb, 450lb, 125lb ballast.
-
06-29-2011, 11:49 AM #102008 Outback V - gravity III ballasts, perfect pass star gazer, hydraulic wake plate, depth finder, water stainer, rad-a-cage tower, board racks, tower mirror, bimini top, audio package d, graphics package e, appearance package, cockpit & tonneau cover, mooring cover, black stainless rubrail, docking lights, OJ 14.25x14.0 prop.
Toys: Ronix Viva 136 with Kai bindings, Phase5 Drew Danielo Pro, Straight Line Sumo Sac 750lb, 450lb, 125lb ballast.