Results 1 to 9 of 9
Thread: Flush Kit Installed
06-21-2011, 09:52 AM #1
Flush Kit Installed
I have been running in brackish water so I installed a flush kit. It was very easy. I thought I would share a couple pictures with the board.
Install Time: 15 Minutes
06-21-2011, 04:47 PM #2
Nicely done! This will be great reference for others that want to do this install.Dan
08 LSV Mods
06-21-2011, 07:37 PM #3Senior Member
- Join Date
- Jun 2008
- Eugene OR
Where did you buy it at? Have you tested it out yet? If so how well does it work?2008 Outback V - Sold but never forgotten.
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill
06-21-2011, 09:33 PM #4
06-21-2011, 11:22 PM #5
it looks just like the one i got installed at rinkers. ran my boat in the driveway for half an hour and it never got hotDavid
2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.
06-24-2011, 06:07 PM #6Member
- Join Date
- Apr 2006
- Live in Little Rock, Ar
Does this cause the impeller to burn out? This looks like it by passes the impeller. I can't tell from the picture, maybe you installed it just after the strainer up from the raw water intake and it still has to go through the impeller? Any help would be appreciated.