Results 1 to 8 of 8
Thread: Look out 06's and 07's
-
06-20-2011, 12:45 PM #1Member
- Join Date
- Jul 2007
- Location
- Sun City, AZ
- Posts
- 57
Look out 06's and 07's
I wanted to keep everyone in the loop. My insurance co. sent my swim platform brackets to a metallurgist in California and he determined the brackets were defective and this should be covered by SC.
SC is reviewing the findings and the letter from my insurance company (they denied my claim) and will get back to me on whether or not they are going to cover the $2,600.00 in damages.2007 Mobius LSV
325 Indmar
2 SONY 12" XPLOD Subs
10 Kenwood 6.5"
2 SONY 600W amps
Wakesurfing is way better than...
-
06-20-2011, 02:04 PM #2Member
- Join Date
- Jul 2007
- Location
- Sun City, AZ
- Posts
- 57
Sorry, I thought I attached this to my earlier post. So, for those who are new to the situation, my swim platform completely broke off the boat because the braces and mounts on the platform and attached to the hull were faulty. SC said the 06's and 07's were not made for surfing!!!!! Even some of the 08 models! I am fighting with them to get this covered and they re-engineered braces and mounts they are using on their newer models that I paid to have installed on mine. $2,600.
So far SC is sticking with their original claim, so if you have any boat older than an 07, watch out or your platform might just rip off!2007 Mobius LSV
325 Indmar
2 SONY 12" XPLOD Subs
10 Kenwood 6.5"
2 SONY 600W amps
Wakesurfing is way better than...
-
06-20-2011, 02:42 PM #3Senior Member
- Join Date
- Aug 2008
- Location
- Cottage Grove, MN
- Posts
- 780
do you have pictures of the new mounts and brackets? I'm wondering what they are doing differently in the newer models?
2006 Outback V - Gone
2008 LSV - Gone
2013 other brand
-
06-22-2011, 02:36 PM #4Member
- Join Date
- Jul 2007
- Location
- Sun City, AZ
- Posts
- 57
Attached are pics of the new brackets and mounts.
2007 Mobius LSV
325 Indmar
2 SONY 12" XPLOD Subs
10 Kenwood 6.5"
2 SONY 600W amps
Wakesurfing is way better than...
-
06-22-2011, 02:37 PM #5Member
- Join Date
- Jul 2007
- Location
- Sun City, AZ
- Posts
- 57
Last picture
2007 Mobius LSV
325 Indmar
2 SONY 12" XPLOD Subs
10 Kenwood 6.5"
2 SONY 600W amps
Wakesurfing is way better than...
-
06-22-2011, 04:18 PM #6Senior Member
- Join Date
- Aug 2008
- Location
- Cottage Grove, MN
- Posts
- 780
is the only difference the set screws at the top of the transom-mounted bracket?
2006 Outback V - Gone
2008 LSV - Gone
2013 other brand
-
06-22-2011, 06:33 PM #7Senior Member
- Join Date
- Jul 2008
- Location
- Flowery Branch Georgia
- Posts
- 201
What does surfing have to do with the platform breaking off?
-
06-23-2011, 03:05 AM #8
Kajay are the new mounts a direct replacement? Do they just bolt up? do you remember how much just the mounts cost? This has me a little worried as my brackets are not that type in the picture you posted. I am assuming the ones I have are the older ones. They do not have any set srews only the pin at the bottom. I was just going to do Brainrinse's mod of adding some stainless allen set screws to the bracket to stop the rattle.
------Sold-------
2008 MOBIUS LSV - Acme 1847, GIII w/1100lbs Vdrive, IBS, PPSG, Wake plate, Z-5, Kenwood 700U, Kenwood Kca-RC107MR , Exile SXT65, Kicker 700.5, Kicker 350.4, Polk MM651, JL 13.5 Thin-Line Sub.