Results 1 to 8 of 8
  1. #1
    Join Date
    Jul 2007
    Location
    Sun City, AZ
    Posts
    57

    Default Look out 06's and 07's

    I wanted to keep everyone in the loop. My insurance co. sent my swim platform brackets to a metallurgist in California and he determined the brackets were defective and this should be covered by SC.

    SC is reviewing the findings and the letter from my insurance company (they denied my claim) and will get back to me on whether or not they are going to cover the $2,600.00 in damages.
    2007 Mobius LSV
    325 Indmar
    2 SONY 12" XPLOD Subs
    10 Kenwood 6.5"
    2 SONY 600W amps

    Wakesurfing is way better than...

  2. #2
    Join Date
    Jul 2007
    Location
    Sun City, AZ
    Posts
    57

    Default

    Sorry, I thought I attached this to my earlier post. So, for those who are new to the situation, my swim platform completely broke off the boat because the braces and mounts on the platform and attached to the hull were faulty. SC said the 06's and 07's were not made for surfing!!!!! Even some of the 08 models! I am fighting with them to get this covered and they re-engineered braces and mounts they are using on their newer models that I paid to have installed on mine. $2,600.

    So far SC is sticking with their original claim, so if you have any boat older than an 07, watch out or your platform might just rip off!
    2007 Mobius LSV
    325 Indmar
    2 SONY 12" XPLOD Subs
    10 Kenwood 6.5"
    2 SONY 600W amps

    Wakesurfing is way better than...

  3. #3
    Join Date
    Aug 2008
    Location
    Cottage Grove, MN
    Posts
    780

    Default

    do you have pictures of the new mounts and brackets? I'm wondering what they are doing differently in the newer models?
    2006 Outback V - Gone
    2008 LSV - Gone
    2013 other brand

  4. #4
    Join Date
    Jul 2007
    Location
    Sun City, AZ
    Posts
    57

    Default

    Attached are pics of the new brackets and mounts.
    Attached Images Attached Images
    2007 Mobius LSV
    325 Indmar
    2 SONY 12" XPLOD Subs
    10 Kenwood 6.5"
    2 SONY 600W amps

    Wakesurfing is way better than...

  5. #5
    Join Date
    Jul 2007
    Location
    Sun City, AZ
    Posts
    57

    Default

    Last picture
    Attached Images Attached Images
    2007 Mobius LSV
    325 Indmar
    2 SONY 12" XPLOD Subs
    10 Kenwood 6.5"
    2 SONY 600W amps

    Wakesurfing is way better than...

  6. #6
    Join Date
    Aug 2008
    Location
    Cottage Grove, MN
    Posts
    780

    Default

    is the only difference the set screws at the top of the transom-mounted bracket?
    2006 Outback V - Gone
    2008 LSV - Gone
    2013 other brand

  7. #7
    Join Date
    Jul 2008
    Location
    Flowery Branch Georgia
    Posts
    201

    Default

    What does surfing have to do with the platform breaking off?

  8. #8
    Join Date
    Jun 2009
    Location
    Sunnyvale, CA
    Posts
    234

    Default

    Kajay are the new mounts a direct replacement? Do they just bolt up? do you remember how much just the mounts cost? This has me a little worried as my brackets are not that type in the picture you posted. I am assuming the ones I have are the older ones. They do not have any set srews only the pin at the bottom. I was just going to do Brainrinse's mod of adding some stainless allen set screws to the bracket to stop the rattle.

    ------Sold-------
    2008 MOBIUS LSV - Acme 1847, GIII w/1100lbs Vdrive, IBS, PPSG, Wake plate, Z-5, Kenwood 700U, Kenwood Kca-RC107MR , Exile SXT65, Kicker 700.5, Kicker 350.4, Polk MM651, JL 13.5 Thin-Line Sub.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •