Results 1 to 6 of 6
Thread: LED Trouble
-
06-30-2011, 07:05 PM #1Junior Member
- Join Date
- Jun 2010
- Location
- Tony Wisconsin
- Posts
- 9
LED Trouble
Tried to wire up some led lights in the cup holders. They are wired in a series starting from the battery back around towards the drivers seat then into the Aux switch. Then to the bow and around. When I the switch off the ones in the back come on. When I turn the switch on they are all off. Need help
-
06-30-2011, 07:12 PM #2
The LEDs need to be wired in parallel.
David
Earmark Marine
-
06-30-2011, 09:58 PM #3Junior Member
- Join Date
- Jun 2010
- Location
- Tony Wisconsin
- Posts
- 9
so do I make my connection to the open terminal on the AUX switch to turn them on and off?
-
07-01-2011, 11:07 PM #4
why go from the bat to the aux switch? The aux switch should already have a power source. when i did my led's i ran them with 18ga wire from switch to driver side gunwale then back around the bow to the observer side gunwale. i joined into the wire at the cupholders in the bow, under the drivers dash and in the observers cabin.
05 mobius ls 310hp carb
-
07-01-2011, 11:08 PM #5
-
07-04-2011, 03:40 PM #6Tazz 07' Moomba LSV --Kicker Marine Amps (MX700.5 & MX350.4) 6 polk DB651 speakers, 4 MB Quartz Marine Speakers, 10" Boston Acoustic Sub, Z-5 Cargo Rack, Custom Speaker/Light Bar, modified ballast system, Custom LED Rings
Live life to the extreme and no less!!