Results 1 to 10 of 11
Hybrid View
-
06-09-2011, 11:51 AM #1
Has anyone ran heater vents to the passenger side?
I'm thinking about T-ing off one of my vent tubes and running it to the passenger side, so there is a pull-out tube under the passenger seat. Just curious if anyone has done this before, and if running a length that long will need an additional fan or anything - or if it will even work at that length.
My thought is that I'd have to run it up through the bow and back down.2013 Outback V
-
06-10-2011, 08:29 AM #2
There was talk of this but in the end if you just run them down the drivers side and exit at the floor, the tubs will extend to the passenger side and then no need to run them all the way around. Also with the these tubes unless you changed them to a hard tube anything that presses on them would flatten them cutting off air flow.
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
06-10-2011, 09:24 AM #3
I was thinking something like PVC for the long runs, tucked up in the space between the outer hull and the top cap, so its out of the way. Its a pipe dream at the moment (pun intended!)
2013 Outback V
-
06-10-2011, 09:32 AM #4
-
06-10-2011, 09:40 AM #5
why the need with the pull out tubes...?
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
06-10-2011, 11:07 AM #6
-
06-11-2011, 07:05 PM #7