resurrecting the endless wave rack

[lsvboombox]

OK I heard back from Michael and it seems like he is interested in doing a production run on the endless rack for the moomba website.

I need you guys to respond with what rack you are interested in, choices are-

30" 41" 46" (i believe Cab has the 30" double)

Single clamp
or
Double Clamp

Clamp Size

Extension 6"

Price is $320 Shipped for the single or double

$25 for the extension

Michael is hooking us up on the price, as they sold for closer to 400 when they were available.

LSVBOOMBOX - 30" single clamp 2 3/8 clamp and a 6" extension
CANUCKLE
CB BOARDER
SHOOTER
SYBRMIKE
TL7

[Shooter]

30" double clamp/silver/6" extension

and thank you for getting this done for us.

[lsvboombox]

LSVBOOMBOX - 30" single clamp 2 3/8 clamp and a 6" extension = $345
CANUCKLE
CB BOARDER
SHOOTER - 30" double clamp ? clamp extension x2 = $370
SYBRMIKE


Shooter whats your tower size

[TL7]

TL7 - 30" double clamp / 2-3/8" clamp / 6" extension ( I guess, do I need an extension?)

also, can someone verify for me that 2010 LSV tower is 2-3/8? I'm fairly sure it is but want to make sure.

[Shooter]

Shooter whats your tower size

I'm not sure. 2007 LSV with Rad-a-cage. I'll have to measure to be sure.

[lsvboombox]

TL7 - 30" double clamp / 2-3/8" clamp / 6" extension ( I guess, do I need an extension?)

also, can someone verify for me that 2010 LSV tower is 2-3/8? I'm fairly sure it is but want to make sure.

I got a '10 lsv and its 2 3/8

[Canuckle Head]

30” double mount for a 2007 OBV

[cab13367]

I've had my boat out three times now since I got my rack so I thought I would chime in here. First off, see the pic below showing how I have mine mounted. It's a double clamp and I have the rack slid forward as far as it will go. I had my 5'-3" CWB Ride on it today, upside down with the nose of the board pointing towards the back. When pulling a wakeboarder, the rope goes just over the top of the nose of the board when the boarder cuts way wide to port. So it's not an issue for me.

As far as double versus single clamp, the double clamp will obviously be more stable as it will not be prone to rotate like a single clamp might. However, as you can see in the pic below, if I had a single clamp, I could mount it to the front tube and that would move the rack about 4" forward from where it sits now. That should be enough that the rope would not hit the board when a wakeboarder cuts out wide. I could easily drill a hole in the center of the rack and convert mine to a single if I want. So for the same price, I guess I would get a double and then just drill the hole and convert it to a single if you need to.

Note that the clamps I am using are not the ones that come with the rack - they are from a set of Fusion speaker cans.

[cab13367]

And as far as length, I definitely recommend the 30". I had my 5'-9" longboard up there and it was just fine.

Finally, all 2006 and newer LSV's have 2-3/8" diameter towers, 2011 V2 tower excepted.

[TL7]

Cab - thanks for the "review". Since this could be a one run only type deal, I think I'm going to go ahead and order the extensions. If it turns out I don't need them, well then I'll just have to live with the extra parts, but I'd rather have them and not need them than need them and no longer be able to order them.

So, to update my order:
TL7 - 30" double clamp / 2-3/8" clamp / 6" extension x 2 = $370.00