Results 1 to 10 of 59
06-08-2011, 02:54 PM #1
resurrecting the endless wave rack
Cab got me in touch with Michael from endless wave and I asked if he would be willing to make another production run on the endless surf rack. He replied that anything was possible. So if you have serious interest in purchasing one please reply here so we can see if we can get enough interest for Michael to make a few more. Please post this on any other sites you frequent, the more people the better the odds..
There are really no details at this point, we just need to see if we can get enough possible buyers to make it worth his time. I did a little research and it seems that they were selling in the 350-400 range the last time they were offered. I am not sure what the price would be now but I realize price will be a factor for some...
Post if your interested.....
06-08-2011, 03:03 PM #2
I'm in!2011 President's Trophy - Check
2011 Western Confernece Champs - Check
2011 Stanley Cup Champs - Not so Much....
2007 Outback V
06-08-2011, 03:05 PM #3
How many boards does it hold?2016 Moomba Mojo
2006 Supra 24SSV - Traded
06-08-2011, 03:10 PM #4
I have seen it with 3 or 4 boards on it..
06-08-2011, 03:11 PM #5
for those that have not seen it
Last edited by lsvboombox; 06-08-2011 at 03:13 PM.
06-08-2011, 03:13 PM #6
What is the cost?-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
06-28-2011, 05:48 PM #7Junior Member
- Join Date
- Jan 2011
- San Ramon, CA
I'm looking for one of these racks too.
Can they be obtained with a clamp size for a 1 7/8 tower?
What is the "extension" for?
Thanks in advance,
06-28-2011, 11:49 PM #8
07-02-2011, 10:44 PM #9Banned
- Join Date
- Jul 2011
Thanks a lot
07-04-2011, 12:38 PM #10
Just an FYI, went out wakeboarding all day yesterday, total of 6 different riders of varying ability, half regular, and half goofy. Had two boards (5'-3" CWB Ride and 4'-9" React Drive) on the 30" endless wave surf rack (without extensions) and can positively affirm that there is no interference issue between boards and rope. Mine is a two clamp mount and I have it mounted all the way forward (as shown in the pic below). I have the boards upside down on the rack (fins up) with the nose point towards the back of the boat.
Your situation might me different depending on boat model, tower type, amount of ballast, etc. but in my case, there is no interference issue.
Thought some might find this useful.
2006 Mobius LSV