Page 4 of 9 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 81
  1. #31
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default

    Matt75 got the new OJ 5 blade and was nice enough to let me try out his acme 537 that came on his axis. My boat came with OJ wakeboard prop, 14.25x14, and his did not pull nearly as good as mine which is to be expected but it was butter smooth. My "ogre" was gone too! I have the stock OJ back on now but an 1847 will be purchased by next spring!
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  2. #32
    Join Date
    Jun 2009
    Location
    Sunnyvale, CA
    Posts
    234

    Default

    Quote Originally Posted by rdlangston13 View Post
    My "ogre" was gone too! I have the stock OJ back on now but an 1847 will be purchased by next spring!
    You really won't be sorry with the 1847. It is really the best mod I have done to date and now I could never go back. If I ever buy a new boat it won't leave the lot without a prop upgrade with the 1847 or comparable.

    ------Sold-------
    2008 MOBIUS LSV - Acme 1847, GIII w/1100lbs Vdrive, IBS, PPSG, Wake plate, Z-5, Kenwood 700U, Kenwood Kca-RC107MR , Exile SXT65, Kicker 700.5, Kicker 350.4, Polk MM651, JL 13.5 Thin-Line Sub.

  3. #33
    Join Date
    Apr 2012
    Location
    Quebec, Canada
    Posts
    59

    Default

    My new 1847 with a prop puller should be delivered tomorrow so my question is: do I have to torque the prop or just tighten it tight?
    Mobius LSV 2011
    GIII, V2 Tower, Indmar 325,

  4. #34
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    Take a sharpie and trace a line on the shaft at the front edge of the prop. When you put the new one on you can tighten it until it reaches the line. Should be in the right spot.
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  5. #35
    Join Date
    Aug 2010
    Location
    Acworth, GA
    Posts
    1,223

    Default

    Quote Originally Posted by hans View Post
    My new 1847 with a prop puller should be delivered tomorrow so my question is: do I have to torque the prop or just tighten it tight?
    Torque to 35 ftlbs
    Kraig - 2010 Outback V

  6. #36
    Join Date
    Apr 2012
    Location
    Quebec, Canada
    Posts
    59

    Default

    Thanks for the answer, I will try to find the tool to torque it.....I didn t get the prop today.....monday I hope
    Mobius LSV 2011
    GIII, V2 Tower, Indmar 325,

  7. #37
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    5,456

    Default

    Here's what my 1847 came with:



    So when is this "old enough to know better" supposed to kick in?

    2001 MobiusV - Slightly Modified...

  8. #38
    Join Date
    Apr 2012
    Location
    Quebec, Canada
    Posts
    59

    Default

    I received my new acme 1847. I notice that on one side ( the side you can see in the rear of the boat) there are perfect grooves in the metal, and on the other side it is like all the grooves has been sanded.....is it normal...are the two sides should be the same?
    Mobius LSV 2011
    GIII, V2 Tower, Indmar 325,

  9. #39
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default

    Quote Originally Posted by hans View Post
    I received my new acme 1847. I notice that on one side ( the side you can see in the rear of the boat) there are perfect grooves in the metal, and on the other side it is like all the grooves has been sanded.....is it normal...are the two sides should be the same?
    they sand a little of the back side off here and there for balancing purposes
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  10. #40
    Join Date
    Apr 2012
    Location
    Quebec, Canada
    Posts
    59

    Default

    thanks for the answer.........so now I have to install it
    Mobius LSV 2011
    GIII, V2 Tower, Indmar 325,

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •