Results 1 to 7 of 7
-
05-30-2011, 10:48 PM #1
Member
- Join Date
- Feb 2010
- Posts
- 85
Getting tower wires from back to front bar?
Anyone get their tower speaker (wire) from the back bar to the front by going through the middle bracke (the one with the night light mounted to?). THis will hide all the wires for a nice look.... If so, please let me know as we are thinking about doing this with our XLV... If there are known issues this may cause, please also advise (ie: structural issues with ski pilon)....
Thanks...
-
05-30-2011, 11:11 PM #2
Senior Member
- Join Date
- Nov 2010
- Location
- Katy, TX
- Posts
- 6,369
people have done it but you have to drill alot of extra holes
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
05-30-2011, 11:25 PM #3
Super Moderator
- Join Date
- May 2009
- Location
- North End Lake Lanier GA
- Posts
- 8,155
Cab has a thread called another stereo makeover a few threads down and shows how to do this.
I also just did this to my tower last week.
Pm me or email me (it's in my sig) I can explain to you how to do it and give you picturesMalo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
05-30-2011, 11:28 PM #4
Senior Member
- Join Date
- Dec 2006
- Location
- Tigard, Oregon
- Posts
- 3,017
I did a how to on this very thing. See below:
Originally Posted by trevormcfar
https://forum.moomba.com/showthread.php?t=14721Al
2006 Mobius LSV
-
05-30-2011, 11:32 PM #5
Senior Member
- Join Date
- Dec 2006
- Location
- Tigard, Oregon
- Posts
- 3,017
Actually, there's just one extra hole visible. If you make the jump from front to back externally ( (assuming you exit the front tower thru the existing hole for the tower nav light)), you still have to drill a hole in the back tube. Originally Posted by rdlangston13
Al
2006 Mobius LSV
-
05-31-2011, 12:20 AM #6
Member
- Join Date
- Feb 2010
- Posts
- 85
Thanks guys... Looks like I got it from all the replies.... This is a great web site for information.... Thanks again!!
-
06-01-2011, 09:49 PM #7
Member
- Join Date
- Jul 2010
- Location
- St. Clair, Minnesota
- Posts
- 76
I just finished this same install last weekend. Looks great in my opinion. Once the holes are covered its not very noticeable at all... and i love the wireless look.
It is kinda a pain to get the wires pulled though... luckily I was working on it in my dad's electricians shop
Good luck with your install!'06 Outback V
Reply With Quote