Results 11 to 19 of 19
Thread: another heater install help ?
-
06-10-2011, 10:27 AM #11
Al, thanks, will do on the zip ties. i thought abour removing and adding the screws after , but decided a slight notch on top and bottom would work.
Can't wait to use it if the fall... Not .. I can wait.A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
06-10-2011, 02:01 PM #12
Might want to check the 2 little screws that go on the side of the tubes (6th pic down). A few of mine stuck thru enough that it would have scraped the hose going in/out and possible tear it. I took mine out and filed down the point of the screws.
2014 Mojo Surf
2013 Mojo Sold
2010 LSV Sold
2002 OB LSV Sold
-
06-10-2011, 02:05 PM #13
-
06-10-2011, 02:21 PM #14
Looks great - good job! I'm right behind you, I plan on installing my hot tubes tonight or tomorrow. Fitting in under the helm was a bit of a challenge and ya it was about two hours to get that sucker mounted. I have to thank Al as well for those great how to photo's to give a guy the courage to do this.
Funny story, I went all over town to try to find a 2 1/4" grommet for the hole in the foot rest that the hoses go through and finally settled on a PVC fitting that I spent an hour grinding down to fit. I went in to work the next day and cleared enough paper off of my desk to realize I had one in my desk that would work...
Happy safe boating this weekend everyone!2006 Mobius LSV 325 hp MPI Indmar
2005 6L Silverado 1500HD Quadrasteer
MODS: Polk DB651's Cabin Speakers, 10" Polk MM1040 Sub in a custom sub box, Kicker ZXM700.5 5 channel Amp, EZ net cargo nets, ACME 1847 Prop, 4 outlet Heatercraft Heater
-
06-10-2011, 02:53 PM #15
-
06-10-2011, 03:07 PM #16
Lowes had them in the nuts and bolts drawers, just screwed the swivel.
Funny about the desk, chop saw works wonders on obv.A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
06-16-2011, 01:05 AM #17Senior Member
- Join Date
- Oct 2009
- Location
- Tumwater, WA
- Posts
- 133
One of the wires got pulled on coming out of my heater and I am not sure where it goes and my heater quit working.
I have 3 wires going to the switch: orange, Yellow and Black, but the red is dust dangling from the heater, It has power when the heater switch is on hi or low.
Do you know where I am supposed to hook it back up to??
Thanks2006 Outback V, Alpine CDA-118M, 2 alpine MC20's, Polk Cabins, 2 Exile XM7s 2 SXT65s (tower), Memphis Mojo 12" Sub in custom downfiring ported box, Kicker 2500.1, Exile Harpoon, JL M6450, WS-420.
Acme 1433, 750lbs Sacs in Rear, GG 1180 (fills to about 700) Sac in Center Locker, 650 lbs Nose bag.
PP Stargazer
-
06-16-2011, 11:13 AM #18
-
06-16-2011, 11:19 AM #19
Top is yellow, bottom is orange, the two sides are red
Check page 5 here.
http://www.heatercraft.com/images/Do...tal_Marine.pdfA Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold