Results 1 to 10 of 16
Thread: Looking for 2-3/8" Clamps
-
05-18-2011, 03:49 PM #1
Looking for 2-3/8" Clamps
Hey gang,
Just bought a used endless wave surf rack but the clamps they come with are too small for my tower. So I was wondering if anyone might have a pair that they are not using and are looking to sell. FYI, below is what I am looking for. They sell for $33 each at diywake.com and I was hoping to find them a little cheaper.
Looking forward to using this rack. Looks like a good solution for my growing wakesurf board quiver!
This is what the rack looks like except mine is silver and is a dual clamp design.
This is what mine looks like:
Al
2006 Mobius LSV
-
05-18-2011, 04:11 PM #2
dealer here has a ton, but they are pricing them at $55. I would guess that the $33 is a good price for mail order.
'06 Supra Launch 20SSV-gone but never forgotten
-
05-18-2011, 04:34 PM #3
Did'nt they stop making that rack?
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
05-18-2011, 04:44 PM #4
Is that the same size clamp needed for an '05 LS Tower?
SOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
Tow Rig:
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
-
05-18-2011, 04:53 PM #5
-
05-18-2011, 06:15 PM #6
I have a couple of clamps in my garage, I'm not sure what the size is, I'll have to go measure and get back to ya.
2013 Outback V
-
05-18-2011, 06:49 PM #7Senior Member
- Join Date
- Jun 2008
- Location
- Eugene OR
- Posts
- 1,786
Al, I have some clamps that are too big for my tower. I do not know the size but i will find out. I have two of them.
2008 Outback V - Sold but never forgotten.
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill
-
05-19-2011, 01:29 AM #8
Thanks guys. Please let me know what size they are once you'd had a chance to measure. And how much you want for them.
AlAl
2006 Mobius LSV
-
05-20-2011, 02:11 PM #9Senior Member
- Join Date
- Jun 2008
- Location
- Eugene OR
- Posts
- 1,786
Al,
I just checked and they are 2-1/2 ish. If you just want to swap that will work for me. I will be up in Tigard on the 29th will you be around town?2008 Outback V - Sold but never forgotten.
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill
-
05-20-2011, 06:01 PM #10