Results 1 to 10 of 34
Thread: Amp for HLCD'S
Hybrid View
-
05-15-2011, 01:31 PM #1
Amp for HLCD'S
I'm getting some kicker hlcd's and wondering if a zx 550.2 would be a good amp to power them. Right now I have a zx 200.2 and a zx700.5 to power my 6 boat speakers, my sub , and my 4 tower speakers.
09 21v LAUNCH
99 Outback LS. Sold
run your engine after you change your oil
68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
Doug
-
05-15-2011, 01:58 PM #2
I have the zx450.2 powering a pair of krypt Hlcds should be fine..
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
05-15-2011, 02:14 PM #3
what should I expect to pay for something like this or that?
09 21v LAUNCH
99 Outback LS. Sold
run your engine after you change your oil
68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
Doug
-
05-15-2011, 06:02 PM #4
-
05-15-2011, 06:46 PM #5
Pm Phil White @ Kicker and ask him, he'll set you straight as to your best bet.
2007 Mobius LSV
-
05-15-2011, 07:45 PM #6
I just installed my Kicker Hlcd's this weekend you will be happy !!!
Because I already had the amp I used a kicker 350.4 it puts out 175 per channel in bridged mode I am only running the 2 mids if I upgrade to 4 I will need a new amp
For your set up if you are planning on going with the 2 tweets and 4 mids the 650.4 bridged would be a good choice 320 watts per channel leaving some head room even for the 6 speaker setup2007 Outback V
-
05-15-2011, 03:32 PM #7
Power wise, the zx550.2 is a good choice for both the basic 4-pod setup (205w x 2) and the "6-Pack" setup with the extra mids (275w x 2). Just be aware that the zx550 is not a current production amp, so be cautious about where you buy from if its sold as "new".
Another good choice would be the IX500.4 for the 4-pod setup and a pair of IX500.4 if you are going with the 6-pod setup. Also, for the 6-pod setup, a pair of zx300.1's and the KX2 External Crossover will deliver 300W RMS to each side.