Results 1 to 10 of 28

Hybrid View

  1. #1
    Join Date
    Feb 2011
    Location
    Sylvan Lake, Alberta
    Posts
    307

    Default Thru-hull mod for ballast

    So, has anyone installed a 4th thru hull intake and overflow for an additional ballast sac? Has any issues occured - spider cracks etc...?

    I am just try to determine if I want to risk the warranty being VOID on my new 2011. I can't see any issues as there are already 3 intakes with the GIII system. Any thoughts???
    Rob Snyder...no not the actor!
    2011 Celestial Blue/Black Accent Moomba Mobius LSV, 340HP

  2. #2
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    6,377

    Default

    Havent added a 4th (yet), but did add 2 thruhulls, no issues so far that I know of
    Hey, Its Moomba time

    Its all about the dash - enjoy the dash, as that is your time between the dates
    13 Mobius LSV-sold
    08 Mobius LSV-sold
    03 Mobius LSV-sold
    life is about finding the balance between being a responsible adult and staying young at heart

  3. #3
    Join Date
    Jun 2009
    Location
    Victoria BC Canada
    Posts
    663

    Default

    Why wouldn't you just add a T fitting to one of the pumps?
    2011 President's Trophy - Check
    2011 Western Confernece Champs - Check
    2011 Stanley Cup Champs - Not so Much....

    2007 Outback V

  4. #4
    Join Date
    Jun 2009
    Location
    Victoria BC Canada
    Posts
    663

    Default

    Stupid editing thing..... Timed out before I could make changes. I meant a T-fitting to the intake and then add the 4th pump. That way you don't wreck your warranty.
    2011 President's Trophy - Check
    2011 Western Confernece Champs - Check
    2011 Stanley Cup Champs - Not so Much....

    2007 Outback V

  5. #5
    Join Date
    Jun 2009
    Location
    Victoria BC Canada
    Posts
    663

    Default

    Quote Originally Posted by Ed G View Post
    like I said before, there's more to the new system than plumbing (electronic modules) and where would you mount the additional pump and module?

    I'm betting your dealer wont be too excited to read this thread
    I don't think you really need the timing modules.
    2011 President's Trophy - Check
    2011 Western Confernece Champs - Check
    2011 Stanley Cup Champs - Not so Much....

    2007 Outback V

  6. #6
    Join Date
    Feb 2011
    Location
    Sylvan Lake, Alberta
    Posts
    307

    Default

    I was just inquiring, I did discuss it with my dealer as well as WakeMakers and I'm thinking about T'ing into the same line as the centre 400lb sac. Just wanted to get others opinions Spencer from WakeMakers thought that T'ing an addition into the existing would be the best solution instead of drilling new thru hull finttings. I'm going to stick with the PLAN of NOT drilling holes
    Last edited by Sea N' Things; 04-28-2011 at 05:16 PM.
    Rob Snyder...no not the actor!
    2011 Celestial Blue/Black Accent Moomba Mobius LSV, 340HP

  7. #7
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    6,377

    Default

    Quote Originally Posted by Sea N' Things View Post
    I'm going to stick with the PLAN of NOT drilling holes
    Thats a good plan
    Hey, Its Moomba time

    Its all about the dash - enjoy the dash, as that is your time between the dates
    13 Mobius LSV-sold
    08 Mobius LSV-sold
    03 Mobius LSV-sold
    life is about finding the balance between being a responsible adult and staying young at heart

  8. #8
    Join Date
    Feb 2011
    Location
    Sylvan Lake, Alberta
    Posts
    307

    Default

    I am Ed, just got off the phone and my items have been ordered, NO thru hull fittings and NO 1100lb sac's I think this is the right/smart decision as well!

    ATM, no 4th pump or module, I will be sharing the same pump as the centre locker 400lb sac. Spencer will be shipping a plumbing diagram as well. I will post it when I receive it...
    Last edited by Sea N' Things; 04-28-2011 at 07:09 PM.
    Rob Snyder...no not the actor!
    2011 Celestial Blue/Black Accent Moomba Mobius LSV, 340HP

  9. #9
    Join Date
    Jun 2009
    Location
    Victoria BC Canada
    Posts
    663

    Default

    Quote Originally Posted by Ed G View Post
    like I said before, there's more to the new system than plumbing (electronic modules) and where would you mount the additional pump and module?

    I'm betting your dealer wont be too excited to read this thread
    This is what I was responding to. That extra 18 inches in length and 1" in width translates to a lot more additional storage room for the placement of things like pumps etc which Ed was questioning if he had room for.

    From all of the pictures I have seen on this site of the LSV, it appears to have a lot more room in behind the observers seat and in the rear lockers as well as the V-Drive compartment than the OBV. Both new and older generations.

    So, that is what I was refering to. Sorry I didn't make that clear.

    So, you wanna meet after school behind the Monkey Bars and settle this or what?

    Sheesh!
    2011 President's Trophy - Check
    2011 Western Confernece Champs - Check
    2011 Stanley Cup Champs - Not so Much....

    2007 Outback V

  10. #10
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    Is it me or does it always seen when an Outback owner is told there boat is smaller then an LSV it's like calling them out but when an XLV owner says an LSV is smaller we just nod our head in agreement?
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •