Results 1 to 10 of 14
-
04-26-2011, 03:44 PM #1
Where to get ballast switch plate?
Can anyone point me in the direction of where to order a ballast switch plate to hold the three individual switches I'll be using in my setup? Looked around on-line, West Marine, etc. and am coming up empty handed.
Looking for something like this or similar -
I don't care what brand like Gravity, Bertha, or just a blank. However I do like the Left | Center | Right labels. Is this something that can be ordered from SC?
I don't need switches necessarily (ordering from WakeMakers) just the plate.
ThxSo when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
04-26-2011, 03:52 PM #2Senior Member
- Join Date
- Sep 2010
- Location
- Lighthouse Point, FL
- Posts
- 211
I was just on the phone w Cynde from Atlanta watersports ordering some parts for a ballast mod that I am working on and the plate is available from them. I think it was 99.00. I may change mine to something different.
REALLY????
-
04-26-2011, 04:39 PM #3A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
04-26-2011, 04:41 PM #4Senior Member
- Join Date
- Sep 2010
- Location
- Lighthouse Point, FL
- Posts
- 211
#111173 Harness, 3 ballast,60 amp $181.19 qty 1
#111046 Harness,3 ballast, switch panel $99.19 qty 1
#111174 Harness, 3 ballast control box $154.38 qty 1
This is right from the e mail I received from Atlanta Marine
ToddREALLY????
-
04-26-2011, 04:51 PM #5
Berg - do you already have the switches and just need the panel to hold them?
Todd - what are you planning?
-
04-26-2011, 05:43 PM #6
Nope - don't have switches or a plate yet. Found a generic sort of one that holds 3 from West Marine for like $15. Not bad (but not great) - I'm sure I could come up with something for labels compared to dropping a Benjamin for just a plate from SC...
Newty is stopping by tonight (hopefully) to help finish masterminding the plumbing and hose routing. Then I'm ordering the remaining pieces from Wakemakers, including the switches, hopefully before week's end.
I thought about making a plate - just takes more time...
Any ideas?So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
04-27-2011, 11:34 AM #7
After all that you never even said anything about the switch plate!
Berg, I'd just build one.
Stop by an audio shop and get a small sheet of the black abs and diy.
PWI as usual...
-
04-27-2011, 12:11 PM #8
We ran outta beer and daylight!
That is exactly what I was thinking with ABS. I'll either stamp or engrave some labels into it for LEFT - CENTER - RIGHT. I used a label maker one time for the old fill/drain switch labels and they were great for a while but faded out pretty quickly.
It would be pretty obvious just looking at the switches in a row which one is which for me but I'm not the only one pushing buttons most days.
Let me know if you find anything on that 1-3/8" 12-UNF thread for a pump adapter. I'll probably hold off on buying parts until at least Friday.So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
04-27-2011, 12:17 PM #9
Heck, get a piece of aluminum stamped out. You could get the labels cut right into it. Anybody got a waterjet machine?
LED backlit? This could turn into something BIG
2007 Moomba Outback - going, going, GONE
2015 "NOT A MOOMBA"
Why Not? Play Hard! Get wet
-
04-27-2011, 12:41 PM #10