Page 9 of 10 FirstFirst ... 78910 LastLast
Results 81 to 90 of 100
  1. #81
    Join Date
    Apr 2010
    Location
    saskatchewan, canada
    Posts
    334

    Default

    well no point in posting pictures......... my platform broke off just the same as the brackets in the earlier posts. They are at the welders right now getting fixed. poor design by moomba, why are the brackets not made out of stainless steel, then you would have no problems.
    Did we get an answer on how to tighten the bracket attached to the boat?? I could not figure it out! Again bad design!!!
    2017 Helix

    Wakemakers 1050s
    Bow bag ( Surf edition)
    Autowake

  2. #82
    Join Date
    Aug 2008
    Location
    Cottage Grove, MN
    Posts
    780

    Default

    Quote Originally Posted by saskie99 View Post
    well no point in posting pictures......... my platform broke off just the same as the brackets in the earlier posts. They are at the welders right now getting fixed. poor design by moomba, why are the brackets not made out of stainless steel, then you would have no problems.
    Did we get an answer on how to tighten the bracket attached to the boat?? I could not figure it out! Again bad design!!!
    did the bracket on the transom break, or the bracket on the platform? Also, are you saying that when tightening the bottom bolts on the transom brackets that you can't get them to tighten? The top bolts should be accessible from inside the boat, you might have to pull the carpet back from the wall of the transom.
    2006 Outback V - Gone
    2008 LSV - Gone
    2013 other brand

  3. #83
    Join Date
    Apr 2010
    Location
    saskatchewan, canada
    Posts
    334

    Default

    The bracket on the swim platform broke just like in the pictures, when i took it off I noticed the boat bracket was a little loose so I tried to tighten it and the screws just turn. I didnt realize that you can get at them from the inside of the boat, I thought they were glassed in.
    2017 Helix

    Wakemakers 1050s
    Bow bag ( Surf edition)
    Autowake

  4. #84
    Join Date
    Aug 2008
    Location
    Cottage Grove, MN
    Posts
    780

    Default

    Quote Originally Posted by saskie99 View Post
    The bracket on the swim platform broke just like in the pictures, when i took it off I noticed the boat bracket was a little loose so I tried to tighten it and the screws just turn. I didnt realize that you can get at them from the inside of the boat, I thought they were glassed in.
    on my boat, only the top bolts are accessible, the bottom bolts are below the level of the floor.
    2006 Outback V - Gone
    2008 LSV - Gone
    2013 other brand

  5. #85
    Join Date
    Apr 2010
    Location
    saskatchewan, canada
    Posts
    334

    Default

    Do they just have a nut on them? I sure hope I can get at them!
    Anybody out there have a 05 lsv and had to tighten the bolts on the swim platform boat bracket???
    2017 Helix

    Wakemakers 1050s
    Bow bag ( Surf edition)
    Autowake

  6. #86
    Join Date
    Aug 2008
    Location
    Cottage Grove, MN
    Posts
    780

    Default

    Quote Originally Posted by saskie99 View Post
    Do they just have a nut on them? I sure hope I can get at them!
    Anybody out there have a 05 lsv and had to tighten the bolts on the swim platform boat bracket???
    yes, the ones that are accessible have a fender washer and a nyloc on them.
    2006 Outback V - Gone
    2008 LSV - Gone
    2013 other brand

  7. #87
    Join Date
    Jun 2008
    Location
    Northern Indiana
    Posts
    54

    Default

    Ian,

    What LED light do you have? And what has been your experience with it?

    Thnaks
    2011 LSV
    Loaded, 340 HP

  8. #88
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,680

    Default How To: Eliminate Your Swim Platform Rattle / Slop...

    Wow, old thread!

    That boat has 3 VisionX, they were not bad, I think about $200/piece. I sold that boat 3 years ago to my dad, and he hasn't had any issues with the lights.
    2013 Outback V

  9. #89
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,680

    Default How To: Eliminate Your Swim Platform Rattle / Slop...

    Edit: in that video just 1 of the VisionX. I later added 2 more. For what they cost now I'm sure there are better options, but in 2011 they were great bang for the buck.
    2013 Outback V

  10. #90
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    3,034

    Default

    I'd should have a look at what they are going for now.


    PWI as usual...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •