Results 1 to 3 of 3
-
04-11-2011, 10:13 PM #1
Question about DIY surf/wake rack
I've tried the search function, but most of ed's posts that have the info have been deleted.
I'm trying to verify (boat is not here currently) that the racks listed will replace the stock Moomba forks using the existing clamp/mount. These are the forks only; I believe Ed did this and it matches up perfectly, but wanted to verify before I ordered them. Otherwise I'll have to wait until I can make it to the storage to measure.
http://www.diywake.com/shop/shopexd.asp?id=625#Current: 2010 LSV
Previous: 2007 Outback
-
04-12-2011, 07:42 AM #2
^^^ that rack is different than Ed's
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
04-12-2011, 12:41 PM #3
I've considered doing the same thing. If I get the chance I will pull off one of mine and put a caliper on it to get measurements between the bolt holes. I'm guessing they'll be the same size across several years of Moombas that have the oblong cross bars?
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...