Results 1 to 10 of 15
Thread: heater switch
-
04-07-2011, 12:20 AM #1
heater switch
i'm doing a heater install and i wanted to buy a switch that sc uses if you get it installed factory. order it from a dealer or over the net?? since i have no current dealer... anyone satisfied with their dealer please give me a name and number to order parts thru.
08 lsv all red- dual battery system, kicker 700.5 and 450.2 amp, 10" kicker sub, wetsounds eq, polk db651 cabin speakers, exile xm7 tower speakers, ss thru hull fittings, seadek pad, evolutions cover
https://forum.moomba.com/showthread.php?t=10664
-
04-07-2011, 07:46 AM #2
Call Atlanta Marine & ask for Heidi. She will hook you up.
678-482-6499
http://www.atlantamarine.com/
-
04-07-2011, 08:35 AM #3
Mike , parts manager at silver lake, NY just ordered me one for pick up on the 21st.
He could probably send you mine and then replace mine in that couple weeks.
Phone: 585.237.5185
its in western NY
http://www.silverlakemarine.com/incl...0&sys=1&bhcp=1A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
04-07-2011, 09:53 PM #4
ok thanks guys
08 lsv all red- dual battery system, kicker 700.5 and 450.2 amp, 10" kicker sub, wetsounds eq, polk db651 cabin speakers, exile xm7 tower speakers, ss thru hull fittings, seadek pad, evolutions cover
https://forum.moomba.com/showthread.php?t=10664
-
05-15-2011, 06:31 PM #5A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
05-16-2011, 12:36 AM #6
Joe,
See post #16 on this thread:
https://forum.moomba.com/showthread....+switch+wiring
Might help you with GI light switch issue as well.
AlAl
2006 Mobius LSV
-
05-16-2011, 09:26 AM #7
Al, Thanks i was looking for that thread last night and forgot wher it was. I wsh we had like a favorite tab on this site....
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
05-16-2011, 10:42 PM #8
Al, the heater switch i have is different than the ballast. I did a test and found the flowwing for those that have one on my bench.
looking at the back of the switch( sorry i suck at ms paint brush) 1 to 4 right /left column
Position 1 right column negative
Position 2 left column Low
position 3 left cloumn postive
position 4 left column high
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
05-17-2011, 08:04 AM #9
JV - you have a granite topped workbench?!?!?
high class, baby. high class.
-
05-17-2011, 09:24 AM #10
^ Ha! I wouldn't recommend using a hammer on that pretty work bench!