Results 1 to 10 of 10
-
03-27-2011, 03:49 PM #1
Calling on owners with stock Jabsco pump systems
Where are the through hull intakes placed? Anyone have any pics?
-
03-27-2011, 08:58 PM #2
-
03-28-2011, 07:27 AM #3
bet he is adding them and wanting to see where the factory put them
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
03-28-2011, 11:59 AM #4
I'm going to be adding an intake or two and want to know how the stock intakes are oriented. Would be great to see some pics taken from under the hull and inside the bilge area.
Ed, you have a nice pic of the pumps, but none of the intakes. You volunteering to take some pics for me?
Stacy, you are right on!
-
03-28-2011, 02:57 PM #5
07, keep one thing in mind-the factory drilled all there holes when it was a blank hull-no motor,no trans and no trailer in the way. I made a misjudgement in one of my thru hulls I added and could not drill up into the boat after drilling the pilot hole down thru the bottom-no big deal in the end but could have been bad.
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
03-28-2011, 03:59 PM #6
-
03-28-2011, 07:21 PM #7
Dont think you want one in front of the paddle wheel and as long as the access is ok that should be a good spot
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
03-29-2011, 02:09 AM #8Banned
- Join Date
- Oct 2005
- Location
- Durham, NC
- Posts
- 649
If you look at the photos from my factory tour, I have some shots of the ballast system being installed.
https://forum.moomba.com/showthread.php?t=12576
-
04-02-2011, 06:11 PM #9
Look at my album. I took out the lawn sprinkler system and replaced the single pump with 3 new pumps. The picture of the intake is the original intake, I just changed it from a 3/4" to a 1" intake and remove the scoop. I just looked at my intakes. The stock intake is directly opposite of the intake for the engine.
Last edited by tazz3069; 04-02-2011 at 06:13 PM.
Tazz 07' Moomba LSV --Kicker Marine Amps (MX700.5 & MX350.4) 6 polk DB651 speakers, 4 MB Quartz Marine Speakers, 10" Boston Acoustic Sub, Z-5 Cargo Rack, Custom Speaker/Light Bar, modified ballast system, Custom LED Rings
Live life to the extreme and no less!!
-
04-02-2011, 11:38 PM #10