Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21
  1. #11
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    6,377

    Default

    um, i dont even know what to say about that one.

    what did ya order, was the 1100 not enough ?
    Hey, Its Moomba time

    Its all about the dash - enjoy the dash, as that is your time between the dates
    13 Mobius LSV-sold
    08 Mobius LSV-sold
    03 Mobius LSV-sold
    life is about finding the balance between being a responsible adult and staying young at heart

  2. #12
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    Ordered IBS, 3 check valves, Y valve, lots of fittings and hose.

    So, going with 1,100 in reg side locker with 370 teed to it under the seat. 750 in goofy side with Y valve mounted about transmission cover to switch pump to IBS and stock center. So, that's some 2,570 lbs for the regular side and 1,850 lbs for the goofy ones.

    While I'm thinking about it, a big THANKS to mandley who refused to leave wakemakers office until Spencer called me and also to Spencer for getting me hooked up!

  3. #13
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,600

    Default

    Heres a vid on removing the fittings. I had to do it when I got my new 750s....I used a regular hairdryer and about 10 minutes or a little less...EASY

    http://www.youtube.com/watch?v=qpW_x...7&feature=plcp
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  4. #14
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    Quote Originally Posted by E4NASH View Post
    Heres a vid on removing the fittings. I had to do it when I got my new 750s....I used a regular hairdryer and about 10 minutes or a little less...EASY

    http://www.youtube.com/watch?v=qpW_x...7&feature=plcp
    Yep, I followed it to a tee and went smoothly for six fittings.... Thought about using the heat gun, but did not want to ruin bags
    Last edited by jmvotto; 05-21-2012 at 10:01 PM.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  5. #15
    Join Date
    Mar 2011
    Location
    Belton, Texas
    Posts
    2,607

    Default

    Quote Originally Posted by E4NASH View Post
    Heres a vid on removing the fittings. I had to do it when I got my new 750s....I used a regular hairdryer and about 10 minutes or a little less...EASY

    http://www.youtube.com/watch?v=qpW_x...7&feature=plcp
    Why did you have to remove the fittings E4? When I got my 750's about a month ago it was just an easy plug and play from boat to the fitting that were shipped with my bags. Am
    I missing something here?


    Sent from my home phone..
    Jason

    Go Hard or Go Home.......it's MOOMBA time!!

    2009 Moomba Mobius LSV

  6. #16
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,600

    Default

    I bought the Moomba upgrade kit from Wakemakers and the bags came without the fittings so I used the fittings that were in my existing 400s. I too thought it was plug and play by the description on the site but it wasn't.

    BTW: I got the stickers and will be shipping them out as soon as I can get big enough envelopes to mail them in. They should go out either tomorrow or Wed.


    Sent from my iPhone using Tapatalk
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  7. #17
    Join Date
    Mar 2011
    Location
    Belton, Texas
    Posts
    2,607

    Default

    That's the same thing I got brotha, got all kinds of fittings in the box. It was kind of under/middle of bubble wrap. May want to check your box? Even got those fancy vent fittings everyone been talking about. All came with the Moomba upgrade I ordered


    Sent from my home phone..
    Jason

    Go Hard or Go Home.......it's MOOMBA time!!

    2009 Moomba Mobius LSV

  8. #18
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    Quote Originally Posted by jpetty3023 View Post
    That's the same thing I got brotha, got all kinds of fittings in the box. It was kind of under/middle of bubble wrap. May want to check your box? Even got those fancy vent fittings everyone been talking about. All came with the Moomba upgrade I ordered


    Sent from my home phone..
    i think he was talking about the quick release fittings. bags come standard with quick twists and plugs
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  9. #19
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,600

    Default

    Right...I needed the quick release fittings.


    Sent from my iPhone using Tapatalk
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  10. #20
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    Quote Originally Posted by wolfeman131 View Post
    While I'm thinking about it, a big THANKS to mandley who refused to leave wakemakers office until Spencer called me and also to Spencer for getting me hooked up!
    Anytime man, i have the direct connect with Exile and Wake Makers as i goto there shop almost every week to shoot the shiz and keep up to date on the newest stuff commming out. Also just pretty good friends with everyone there.

    Yesterday after i helped you i went with Brian to Sampson in Washington and we unloaded 100 pairs of XM9s from the container, and then loaded it in the Exile trailer. Headed back to OR so he could get some orders out.

    Basically what Wolf does with Atlanta Marine i do with Exile and Wake Makers
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •