Results 11 to 20 of 21
Thread: Removing Glued Fly High Fitting
-
05-21-2012, 08:36 PM #11
um, i dont even know what to say about that one.
what did ya order, was the 1100 not enough ?Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
05-21-2012, 08:51 PM #12
Ordered IBS, 3 check valves, Y valve, lots of fittings and hose.
So, going with 1,100 in reg side locker with 370 teed to it under the seat. 750 in goofy side with Y valve mounted about transmission cover to switch pump to IBS and stock center. So, that's some 2,570 lbs for the regular side and 1,850 lbs for the goofy ones.
While I'm thinking about it, a big THANKS to mandley who refused to leave wakemakers office until Spencer called me and also to Spencer for getting me hooked up!
-
05-21-2012, 09:47 PM #13
Heres a vid on removing the fittings. I had to do it when I got my new 750s....I used a regular hairdryer and about 10 minutes or a little less...EASY
http://www.youtube.com/watch?v=qpW_x...7&feature=plcpSOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
Tow Rig:
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
-
05-21-2012, 09:49 PM #14
Last edited by jmvotto; 05-21-2012 at 10:01 PM.
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
05-21-2012, 09:51 PM #15Jason
Go Hard or Go Home.......it's MOOMBA time!!
2009 Moomba Mobius LSV
-
05-21-2012, 11:02 PM #16
I bought the Moomba upgrade kit from Wakemakers and the bags came without the fittings so I used the fittings that were in my existing 400s. I too thought it was plug and play by the description on the site but it wasn't.
BTW: I got the stickers and will be shipping them out as soon as I can get big enough envelopes to mail them in. They should go out either tomorrow or Wed.
Sent from my iPhone using TapatalkSOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
Tow Rig:
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
-
05-21-2012, 11:10 PM #17
That's the same thing I got brotha, got all kinds of fittings in the box. It was kind of under/middle of bubble wrap. May want to check your box? Even got those fancy vent fittings everyone been talking about. All came with the Moomba upgrade I ordered
Sent from my home phone..Jason
Go Hard or Go Home.......it's MOOMBA time!!
2009 Moomba Mobius LSV
-
05-22-2012, 09:04 AM #18
-
05-22-2012, 09:31 AM #19
Right...I needed the quick release fittings.
Sent from my iPhone using TapatalkSOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
Tow Rig:
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
-
05-22-2012, 12:37 PM #20
Anytime man, i have the direct connect with Exile and Wake Makers as i goto there shop almost every week to shoot the shiz and keep up to date on the newest stuff commming out. Also just pretty good friends with everyone there.
Yesterday after i helped you i went with Brian to Sampson in Washington and we unloaded 100 pairs of XM9s from the container, and then loaded it in the Exile trailer. Headed back to OR so he could get some orders out.
Basically what Wolf does with Atlanta Marine i do with Exile and Wake MakersMalo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]