Results 1 to 10 of 21
Thread: Removing Glued Fly High Fitting
03-24-2011, 06:16 PM #1
Removing Glued Fly High Fitting
We know a lot of you have been buying used ballast bags lately, and you may be swapping out fittings on them
Someone tried Wakemakers tip on removing glued fittings today.
Works like a charm, but you can't be timid about it. You have to be determined and a little brutal with it.
Don't worry, you won't hurt anything.
They recommend heating the joint for at least 5 minutes, he found that 7 minutes with a 1600 watt hair dryer was the ideal time.
And it really does "pop" when it breaks loose09 21v LAUNCH
99 Outback LS. Sold
run your engine after you change your oil
68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies