Results 1 to 5 of 5
-
03-23-2011, 02:07 PM #1Junior Member
- Join Date
- Mar 2011
- Location
- Oklahoma
- Posts
- 3
MB Quart black box remotes WRC-S2
Would anyone happen two know how many wired remotes the MB Quart black box will support? I have a 2010 Outback V which came with the black box main unit which is connected to a main controller which is in the glove box, it also has a WRC-S2 wired remote at the drivers console. I bought the (Y) splitter cable and another WRC-S2 remote for the transom. It was working just fine for about a week and now all three displays are blank. When I unplug the new remote the other two work just fine. Just wondering is anyone else has run into this issue.
Get Outside!!!
-
03-23-2011, 06:12 PM #2
-
03-24-2011, 09:19 AM #3Junior Member
- Join Date
- Mar 2011
- Location
- Oklahoma
- Posts
- 3
So did your boat come from the factory with all three remotes or did you add one? Im guessing I have a loose connection causing my issues. The remote issue started after rough water crossing. Prior to that is was working just fine.
Get Outside!!!
-
03-24-2011, 12:42 PM #4
-
04-12-2011, 01:22 PM #5Junior Member
- Join Date
- Mar 2011
- Location
- Oklahoma
- Posts
- 3
Problem solved!
Thanks for the information. I ordered a new "Y" cable and now the head unit driver and transom remotes are all working fine. Guessing there was a broken pin in one of the plugs or a damaged wire???
Get Outside!!!