Winter Project is complete, pics inside!!!!

[dusty2221]

Kg and my joint project has finally drawn to a conclusion. Give us some feedback guys, likes, dislikes, what do you think? In the pics, His boat has the 3 JL amps, and mine has the 2 JL and the Kenwood on the bottom.

Custom Amp Rack, all wires routed and attached cleanly to the back. Behind the rack are 2 Stereo batts and 1 Crank Batt

Sub Amp, Stereo Batt Charger, main breaker, Inverter

Shine a little light on it. Kg's camera captures the glow 100x better than mine, just wait

Outside looking in, crummy cell pic

[dusty2221]

Krypt 4200 EQ

Another shot of the EQ, truely a nice piece of equipment

HSE, for the lazy man

Transom Remote and Rear vent glowing away

[dusty2221]

Front Vents, turned out beautiful. Underneath was coated with reflective material so they glow amazing

All the inboats had LED's added behind the grills, so the whole speaker glows

Shot if the polks

More polk and led goodness

[dusty2221]

LED in the polks, and above in the bow

Helm

Roswell. Used the factory Circuit board, with 5 superflux led in each. Factory had 20 5mm. SF blow them away

Factory floor lighting changed to red with SF

[dusty2221]

Shot one of the driver seat

Shot two. This single light really helped bring it all together. The seat caused a dark spot, this one solved it

The glovebox HAD to be lit up. This is sooo nice

A little trailer bling

[rdlangston13]

wow! looks very sharp! yall need to come down to houston and give me a hand on my install!

[KG's Supra24]

Well we have def gone red. I took all of my pics one night as soon as we got the LEDs in. I'll have to get some none LED pics later.

It is def difficult to take pics of LEDs but I got a couple good ones that give you an idea of the glow. The red is great because it is a solid glow without any eye blinding brightness

Here are the switches we used to save some battery. Seat comes up, light goes on .. seat goes down, light goes off. Passenger seat, rear facing seat, and ski lockers.



Looking down at the bow. Lighted vents and lighted cupholders



Lit ski lockers (with the switches)



Lit above cupholders and lit speaker basket

[scoot_gt]

HSE, for the lazy man

Very nice install for both you guys!

I've got an HSE to install into my 2010 LSV. I like where you mounted it. Could you post some pics of your mounting rig underneath? Any tips for installation - how did you connect the Tach signal?

[viking]

Looks good! I knew you guys were hard at work. Was wondering if it was ever going to get finished.......ha ha!

But then again - it never is, is it

[mcdye]

Superb job guys!!