"Exile Boat" and Tow Vehicle

[11 Outback V]

Sorry for the "Test" Was trying to post pics and didnt realize I couldnt change that.....

Finally got the time, and help to get these images up.

This is my 11 OBV, It has the GIII System w Wakeplate, two sets of swivel racks, bow filler cushion and a bimini top. I have made some changes to it and will gladly show them off.
Comments positive or negative are all welcome.

I picked her up in October and brought her home to start the MODS.



I added a FULL Evile system, Big 12, 2 prs XM7s, 3 prs SX65, 800.4, 2500.1 and a Harpoon.
I added a second battery as well as relocating the original one and added a battery charger. Added a blue wheel, Blue LED dash lights, Blue LEDS in and above the cup holders, Blue LED bars under the dash and in the storage compartment.
I added shelves in the rear lockers above the ballast bags, they are removeable.
Added more interior lights and tinted the windshield.



Front Battery


Second Battery

[11 Outback V]

Battery Charger


Tower Speakers


Rear Storage

[11 Outback V]

Amp Rack




Dash w Sub

[11 Outback V]

Sub up close, and yes there is a grill to cover it.



I will add to this soon showing some of the things that went into all this when I get a chance to dig out the pics.

That is if you want tosee more??????

Thanks for looking at my MOOMBA.....

[rdlangston13]

that looks pretty clean!

I really like the shelves over the ballast bags...may have to do something like that myself. any pictures of that process would be greatly appreciated

[moombadaze]

Todd, gotta say it again, sick setup you have there.

Do you have 4 spinning racks?

How did you run the tower speaker wires?-I dont see any wires


Post more photos, getting a couple idea's


35" tires 6" lift on the truck?

[brain_rinse]

The whole setup looks great! Can you give some more detail on the false floors in the rear lockers and the sub box and why/how the sub is recessed?

[11 Outback V]

Moomba- I mounted the speakers on the front tube and used a vacuum to get the wire from the bottom to the top. I used the front tube for the XM7s and I will stagger the SXT65Qs on the rear tube.
And you are correct 35 + 6.

Brain
The rear shelves are made from starboard. I heat bent the sides to match the exact shape of the boat. Then attached a "lip" all the way around so the shelf could sit on it and still be removable ie.. the hand holes.
As for the sub that is a Big 12 that i recessed into the enclosure using an old style fiberglass technique. it is fairly simple just takes some time.

[KG's Supra24]

Very nice setup! Love the all white.

I guess the OBV has more room under the helm? Or did you cut out a hump? You seem to have more legroom with the exile box than others. Recessed is very cool look.

[deerfield]

Why two holes in the rear storage?