Results 1 to 10 of 30
Thread: Anyone have Moomba Step Plates?
-
06-17-2008, 03:24 PM #1
Anyone have Moomba Step Plates?
I noticed that the Supra Gravity Games brochure boat has step plates/pads from the factory, I'd love to add these to my boat, but it doesn't appear to be something I can get direct from Skiers Choice.
This is what I'm referring to;
I've found these, but they look too cheezy, I want something nice, like machined aluminium or stainless;
http://www.westmarine.com/webapp/wcs...1&classNum=162
Does anyone have any suggestions or know of anything? I think something with the Moomba logo would be even better!
-
06-17-2008, 03:53 PM #2
ian, i now someone who got a set of the no slip pads for the trailer fenders-they were cut out and said moomba on them and put them in the same location-actually looked good
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
06-17-2008, 04:18 PM #3
Ian, I have looked for the same and came up empty. I found this but haven't gone any further.
-M
http://shopping.rexmar.com/Merchant2..._Code=steppads
-
06-17-2008, 04:29 PM #4
-
06-17-2008, 04:30 PM #5
-
06-17-2008, 05:06 PM #6Senior Member
- Join Date
- Oct 2004
- Location
- Marietta, GA
- Posts
- 297
I'll have some made for you guys with the Moomba Logo engraved in them. Give me an idea of the size and what price you'd be willing to spend. I invision them being billet aluminum about 3 inches by 6 or 8 inches. Chromed or electric polished (ie like the board racks finish) Let me know......................
Aqua2005 Moomba 23 XLV
340 HP, Clarion 5 HU, 2 Clarion wired digital remotes, 2 Wetsounds 485's, 6 Wetsounds XS 650's, 1 JL 12w6 Sub, 1 Wetsound WS420, 2 JL 300/2amps, 1 Wetsounds Sync 4 amp, 1 JL 500/1 amp. Teak swim platform, Perfect pass. Flip up Bow Light, Chrome tower Nav Light, Chrome thru hulls, Black Bimini, 2 750 Flyhigh bags, 1100 center Flyhigh bag, Acme 1235 14.25 x 14.5 prop, Dual battery system. Evolution Cover. Chrome Blower Vent Covers.
-
06-17-2008, 05:34 PM #7
I bought a bulk piece of 3mm thick Seadek and cut 40+" long strips 2.75" wide and stuck them on the tops of the gunnels. It actually matches the Moomba platinum exactly. Goes from the tower legs to the gas fill or thereabouts. NO feet can touch the 'glass at all and it looks killer.
2007 Mobius LSV
-
06-17-2008, 05:43 PM #8
Ian
Contact parts guru Anthony Cooper at Skiers Choice.. see if it is available...Brad
2011 Launch 21V Sold... boatless replaced with a Jeep JKUR
2006 Moomba Mobius LSV sold
2004 Outback sold
-
06-17-2008, 07:15 PM #9
Aqua, I'm a little interested. If you get a decent amount of people interested, let me know on cost. Although it seems like I remember the Supra ones having some plastic or rubber on them as well. Otherwise wouldn't they be super slippery? Also, how would these be fastened, just drill through the fiberglass? Sorry for all the questions!
-
06-17-2008, 08:03 PM #10
I would definately be interested as well, but as mentioned by Aqua, I'd like to have some rubber incorporated, possibly like where the Moomba logo is cut out have the rubber come up through the aluminium. I'm not sure what I'd pay, please give a price range
Last edited by ian ashton; 06-17-2008 at 08:05 PM.