Results 11 to 14 of 14
Thread: Anyone ever...
-
11-30-2010, 03:41 PM #11
-
11-30-2010, 05:27 PM #12Senior Member
- Join Date
- Apr 2010
- Location
- saskatchewan, canada
- Posts
- 334
So it washes as you start your cut at the wake and increases as you load the line? And when you cut back from the other side is stays firm on cutting side and washes in the landing side.
So it stays firm on which ever side you are making your cut on??
-
11-30-2010, 06:03 PM #13
Yes, good shape and size on the cutting side with very minimal wash on the lip of the landing side. I should have mentioned that if you're short line then the wake is clean on both at slower speeds 21-22. If you're riding the XLV with 70' line then you need to be at 23+.
-
12-01-2010, 10:40 AM #14Senior Member
- Join Date
- Apr 2010
- Location
- saskatchewan, canada
- Posts
- 334
That makes sense. I do agree about crashing at 23-24 hurt more. When I upgraded to 750s rear and 650 bow we bumped the speed up to 23 and you can go way bigger and fall way harder!