Results 1 to 10 of 10

Thread: small issues

  1. #1
    Join Date
    Jul 2010
    Location
    Northern VA
    Posts
    132

    Default small issues

    Hey guys, had the boat a couple months now, got a little over 40 hours and had a few questions-

    Is there an adjustment for the rear storage locker struts? Mine keep falling down, knocking me on the head or catching my legs or arms. The boat is only 2 months old so I don't think they're worn out... but neither stays up- if i'm on land one is usually favored by a slight tilt of the ground and will stay up, but the other one constantly crashes. Sitting in the water they'll both fall from any motion.
    I did have one come unscrewed from its bracket at the end, i guess from vibration/use, but I just screwed it back on. Thoughts?

    Also, having issues with the tower pads and a search showed me this was a common issue. I've had it back to the dealer to fix the one, the other was starting to come out but he said he wouldn't fix that one until it's all the way out... so bring it back. Will the dealer be able to come up with a better solution or should I just man up and go rig something up that will stay better?? Seems silly to me... but I didn't exactly feel I should need to rigging things on a brand new boat...

    And last, just worried about some vibration - it's mostly at slower speeds, say 8-14 mph, and it's not big, but I was just worried a little. Like I put my hand on the windshield and can feel it, and can feel it a little in my feet, but just sitting there the regular person doesn't notice it. Do I chill out, a little vibration is normal, or should I be checking into it? I haven't hit anything.

    Things are going great overall, I'm loving it! Just need to move to Florida...

  2. #2
    Join Date
    Jun 2008
    Location
    Ottawa, Ontario
    Posts
    929

    Default

    Quote Originally Posted by schuylski View Post
    And last, just worried about some vibration - it's mostly at slower speeds, say 8-14 mph, and it's not big, but I was just worried a little. Like I put my hand on the windshield and can feel it, and can feel it a little in my feet, but just sitting there the regular person doesn't notice it. Do I chill out, a little vibration is normal, or should I be checking into it? I haven't hit anything.
    I bet $100 that you have an OJ 14.25x14 prop installed on your boat.

    If you do, it's normal.
    2008 Outback V - gravity III ballasts, perfect pass star gazer, hydraulic wake plate, depth finder, water stainer, rad-a-cage tower, board racks, tower mirror, bimini top, audio package d, graphics package e, appearance package, cockpit & tonneau cover, mooring cover, black stainless rubrail, docking lights, OJ 14.25x14.0 prop.

    Toys: Ronix Viva 136 with Kai bindings, Phase5 Drew Danielo Pro, Straight Line Sumo Sac 750lb, 450lb, 125lb ballast.

  3. #3
    Join Date
    Sep 2010
    Location
    Lake wallenpaupack PA
    Posts
    872

    Default

    [QUOTE=schuylski;116956]Hey guys, had the boat a couple months now, got a little over 40 hours and had a few questions-

    Is there an adjustment for the rear storage locker struts? Mine keep falling down, knocking me on the head or catching my legs or arms. The boat is only 2 months old so I don't think they're worn out... but neither stays up- if i'm on land one is usually favored by a slight tilt of the ground and will stay up, but the other one constantly crashes. Sitting in the water they'll both fall from any motion.
    I did have one come unscrewed from its bracket at the end, i guess from vibration/use, but I just screwed it back on. Thoughts?

    QUOTE]

    I have a strut that is weak as well... The other is fine. I was going to swap them and see if its a bad strut or the location of the mounts may be different?? I believe attwood makes struts and they can easily be replaced..

  4. #4
    Join Date
    Jun 2009
    Location
    Between Baton Rouge & New Orleans, LA
    Posts
    83

    Default

    i notice some vibration in mine at slow speeds and it seems normal. but you may want to check to see if something is wrapped around the shaft or prop. the smallest string or weed wrapped on the shaft can cause more than the normal vibration.

    i agree the prop you have could be causing it too.
    '08 OBV-gravity III with two 550 lb & one 400 lb, 3 pair of Kicker KM613 cabin speakers, Kicker KM10 sub, one set KM6500.2 HLCD tower speakers, Kicker ZXM700.5 amp, Kicker ZX450.2 & Kenwood KMR-440U head unit

  5. #5
    Join Date
    Sep 2009
    Location
    Copperas Cove, TX
    Posts
    1,761

    Default

    Get rid of the OJ prop and get an Acme 1235 or 1433. You'll love your boat alot more and will perform better than new. Zero vibration, better holeshot, mine gained topend with the 1235 (running 46mph), quieter inside the cabin, and a much cleaner wake.

  6. #6
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,259

    Default

    Quote Originally Posted by you da man View Post
    Get rid of the OJ prop and get an Acme 1235 or 1433. You'll love your boat alot more and will perform better than new. Zero vibration, better holeshot, mine gained topend with the 1235 (running 46mph), quieter inside the cabin, and a much cleaner wake.
    what prop were you running before and what was your top end. also is that gps or boat speedometer?
    thanks
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  7. #7
    Join Date
    Jan 2003
    Location
    Minnesota and Wisconsin
    Posts
    1,197

    Default

    Regarding the struts - make sure no one is laying on it when you lift it..
    If you believe something to be true, it will be - in it's consequences.

    2009 MasterCraft ProStar 197 - DD - 5.7L - 325HP - Zero Off

  8. #8
    Join Date
    Sep 2009
    Location
    Copperas Cove, TX
    Posts
    1,761

    Default

    Quote Originally Posted by DOCDRS View Post
    what prop were you running before and what was your top end. also is that gps or boat speedometer?
    thanks
    I had the stock OJ wakeboard prop 14.25 x 14. Topend on that was 43mph indicated and now it's 46 indicated on the 1235.

  9. #9
    Join Date
    Jan 2008
    Location
    Pensacola, FL
    Posts
    1,585

    Default

    Strut- They should stay up after you lift. If not, have the dealer replace them (I assume your boat is new). If not new, take strut off, go to auto parts store and match up a new one, replace yourself. If the screws are an issue, add some loctite or silicone sealant to stop them from coming loose.

    Press you dealer to fix the tower pad issues.

    You boat should not vibrate at all on smooth water. Since you have used it, it will be hard to determine that you have not struck something. A prop repair shop should be able to fix it for you. Perhaps your dealer can help out, especially if you have mentioned it to him before.
    1997 MasterCraft 205

    2008 Moomba Outback
    1999 MasterCraft Sportstar OB
    1992 MasterCraft 205
    1999 Malibu Response LX
    1987 Marlin Magnum Skier

  10. #10
    Join Date
    Jun 2009
    Location
    Newberg, Oregon
    Posts
    175

    Default

    More then likely the vibration you are feeling is being caused by slight cavitation. Probably caused by how the water is moving past the hull and prop. If it was something stuck to your prop or damage to it, the vibration would increase as your speed increases. You could also be experiencing a resonant frequency vibration that is just happening to occur between 8-14mph. I had this happen on my boat after the prop (Acme 1235) was repaired when my drive shaft snapped in half. Changed props at the vibration went away. Changing props could make the vibration go away, but it might not as well. Just depends on if the prop is the cause or not. I feel slight vibrations all the time in my boat that no one else ever notices, partly because I do vibration analysis for a living. If the vibration you are feeling starts to increase or changes characteristics then I would try to figure out what is causing it. If it hasnt changed and is minor I wouldn't worry about it too much.
    Nate

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •