Results 1 to 10 of 40
Hybrid View
-
10-15-2010, 10:28 PM #1
Dropped the fog straw into cyliner?
When following Cab's winterizing procedure I think I made a big booboo..
I think I dropped the fogging straw into the cylinder (through spark plug hole). I shifted while lubricating and pop - it was gone. It was getting dark so I had to clean up and quit. Any ideas???? Help!!
I'm going to try moving the flywheel tomorrow and see if I can see anything. My next step is a flexible camera from Home Depot.06 LSV
2 - 750lb Fatsacks, Custom Sunbrella Cover and Bimini, Kenwood KMR440MU and Amp Bazooka Tower Speakers, Aerial Mirror, Stargazer, 4 Port Heater.
Toys - O'Brien Natural, CWB Pure, IS Yellow Loogie, CWB Ride, Hyperlite Voyageur for the kids.
-
10-15-2010, 10:48 PM #2
-
10-16-2010, 12:03 AM #3Senior Member
- Join Date
- Jan 2008
- Location
- Pensacola, FL
- Posts
- 1,585
How long is that straw? You piston can only be like 4" in diameter. Shop vac is a great idea.
1997 MasterCraft 205
2008 Moomba Outback
1999 MasterCraft Sportstar OB
1992 MasterCraft 205
1999 Malibu Response LX
1987 Marlin Magnum Skier
-
10-16-2010, 08:00 AM #4
Could also try one of those flexy shaft grabbers where there are 3-4 claws retracted into it. You push the spring loaded button on the end and the claws come out, let go and they retract back in hopefully grabbing whatever they have touched. I have a couple different sizes of them and I believe one is small enough to fit through a spark plug hole. If you get the piston pushed to the top of it's travel you may be able to get it out of there...
Good luck man!So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
10-16-2010, 09:12 PM #5
Do you know what that flexy thing is called..could be step 2 after shop vac
06 LSV
2 - 750lb Fatsacks, Custom Sunbrella Cover and Bimini, Kenwood KMR440MU and Amp Bazooka Tower Speakers, Aerial Mirror, Stargazer, 4 Port Heater.
Toys - O'Brien Natural, CWB Pure, IS Yellow Loogie, CWB Ride, Hyperlite Voyageur for the kids.
-
10-16-2010, 11:08 PM #6