Results 1 to 6 of 6
-
10-12-2010, 05:43 PM #1
Senior Member
- Join Date
- Jul 2009
- Location
- Spokane, WA
- Posts
- 503
Something to Add to your Winterization List
I came across something this weekend that I would recommend be added to everyone's winterization list. If not your winterization list, your summerization for sure.
I was messing with the prop the other day, and notice a little slop. Didn't think too much of it. Then, this weekend, was doing some cleaning in and arond the engine, and decided to check alignment. As soon as I stuck my hand down by the coupling, I knew there was a problem. All 4 of the coupling bolts were loose!!
So, one thing to add to winterization, or summerization, or both, is check your alignment. It's a pretty easy process, and shouldn't take more than about 20 minutes (as long as eveything is plumb and within spec). And of course check these bolts occasionally for them being tight. After finding this, I've read numerous posts around on this board and the Supra board about these bolts!
Here's a pretty solid description is you're so inclined:
http://supraboats.com/bbs/showthread...haft+alignment2015 Supra SC400
08 LSV - Sold
Go big, or go home.
-
10-12-2010, 06:44 PM #2
Senior Member
- Join Date
- Jun 2008
- Location
- Eugene OR
- Posts
- 1,786
squeeg333,
That is good to know. Do you have photo's so i know what i will be looking at?2008 Outback V - Sold but never forgotten.
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill
-
10-12-2010, 06:51 PM #3
Senior Member
- Join Date
- Jul 2009
- Location
- Spokane, WA
- Posts
- 503
Jester - unfortunately I haven't taken any pics, but I can this weekend. Someone else might have a few they can donate to the cause though!
Bascially, it's the coupling from the v-drive to the propeller shaft. It'll be behind the v-drive. Between your (assumed) dripless packing and the v-drive. There's a steel coupling attached to the v-drive shaft, and a brass coupling attached to the propeller shaft. These coupling are connected by 4 bolts with nylock nuts. Kind of tricky to get at, but well worth a look.
I don't think mine were ever tight from the factory, in looking at the condition of the threads near the vicinity of the coupling itself. Luckily, they weren't in too bad of shape to have to replace - though I probably will next year.Last edited by squeeg333; 10-12-2010 at 06:55 PM.
2015 Supra SC400
08 LSV - Sold
Go big, or go home.
-
10-12-2010, 08:11 PM #4
Senior Member
- Join Date
- Jan 2008
- Location
- Pensacola, FL
- Posts
- 1,585
I also put silicone lube on the strut bearing and prop shaft. Those seals will expand, contract, and in the past have frozen the shaft. It took effort to break it free.
1997 MasterCraft 205
2008 Moomba Outback
1999 MasterCraft Sportstar OB
1992 MasterCraft 205
1999 Malibu Response LX
1987 Marlin Magnum Skier
-
10-12-2010, 08:16 PM #5
Senior Member
- Join Date
- Jul 2008
- Location
- Des Moines, IA
- Posts
- 3,237
It's posted in the how-to forum on this site as well: https://forum.moomba.com/showthread.php?t=10834
-
10-18-2010, 12:58 PM #6
Senior Member
- Join Date
- Jul 2002
- Location
- London Ontario Canada
- Posts
- 2,259
I am a big preponent of checking alignment , its easy and simple and will make your seals , vdrives ,tranny's last much longer....as wellas having a piece of mind
09 21v LAUNCH
99 Outback LS. Sold
run your engine after you change your oil
68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
Doug
Reply With Quote
