Results 1 to 10 of 19
Thread: Oil change gone bad
-
09-30-2010, 08:47 PM #1
Senior Member
- Join Date
- May 2010
- Location
- Quebec City, Quebec, Canada
- Posts
- 128
Oil change gone bad
oil change gone bad.
Pictures speak for themselfs...
Can you help me find the replacement part ?
It's probably made by perme-cool..
thanks____________
03 Mobius LSV
-
09-30-2010, 09:42 PM #2
Senior Member
- Join Date
- Oct 2008
- Location
- Central, Arkansas
- Posts
- 847
Mine was broke there when i bought my '02 last yr, got my replacement from Summit Racing...it was exact match..
another place... http://www.alamomotorsports.com/pmc/Cat_page31.htmlLast edited by mcdye; 09-30-2010 at 10:00 PM.
-
09-30-2010, 11:40 PM #3
Senior Member
- Join Date
- May 2007
- Location
- Richmond, VA
- Posts
- 2,102
Hey, Martin - What exactly happened? - Deerfield
Oh, just saw that your birthday was earlier this week. Hope you had a great day. Happy Birthday!Last edited by deerfield; 09-30-2010 at 11:53 PM.
2007 Outback - SOLD June 2016
2012 RAM Crew Cab
2015 Subaru Forester
Stuart
"When you first start out with something new, you're always a little uptight." - Don Rickles
-
10-01-2010, 09:29 AM #4
Senior Member
- Join Date
- Jul 2008
- Location
- Snellville, GA & Lake Sinclair
- Posts
- 8,419
I think he had the same problem that I did last weekend! The dang filter had been installed too tight/without the seal gasket being lubed. I almost broke my bracket too and probably would have if it hadn't gotten dark and I hadn't read Razzman's post about taking the mount off and putting the whole thing in a vise.
-
10-01-2010, 10:00 AM #5
Senior Member
- Join Date
- May 2010
- Location
- Quebec City, Quebec, Canada
- Posts
- 128
Exactly as wolfman says... The last oil change has been made by a generic boat dealer who probably installed it too tight/without the seal gasket being lubed. It ended up in a vise...
(Thanks McDye)____________
03 Mobius LSV
-
10-02-2010, 08:13 AM #6
Senior Member
- Join Date
- Nov 2009
- Location
- Gatineau, Quebec
- Posts
- 169
-
10-02-2010, 09:46 AM #7
Senior Member
- Join Date
- Jul 2009
- Location
- East Central Indiana
- Posts
- 848
well that's not too bad- I was expecting to see something more graphic like a picture of you pouring oil into the transmission or something lol!
2021 Malibu 23 LSV
2008 OBV-Sold!
2001 Ski Nautique closed bow-slalom course only!
attracted to shiny things that float
-
10-02-2010, 01:03 PM #8
Senior Member
- Join Date
- Jul 2009
- Location
- Fort Worth, TX
- Posts
- 1,049
why not just get it welded back up.
-2012 Supra Launch 21V
-2008 Mobius LSV
-
10-02-2010, 08:12 PM #9
Senior Member
- Join Date
- Nov 2009
- Location
- Murfreesboro, Tennessee
- Posts
- 206
Same as the one you have now.
http://www.summitracing.com/parts/TRD-1045/
If you have the room to run your lines on one side you could go with one like this. Might be easier to reach the filter if the lines are on the same side. They have a right side or a left side ports.
http://www.summitracing.com/parts/PRM-1701/
Last edited by badasshybrid; 10-02-2010 at 08:18 PM.
99 Moomba Outback with lots of work
-
10-03-2010, 03:56 PM #10
Senior Member
- Join Date
- May 2010
- Location
- Quebec City, Quebec, Canada
- Posts
- 128
thanks guys, I'm gonna go with the same setup that the boat came with because i don't think I can screw two 'L' fittings on the same side due to fittings size.
____________
03 Mobius LSV
Reply With Quote