Page 1 of 3 123 LastLast
Results 1 to 10 of 30
  1. #1
    Join Date
    Aug 2010
    Location
    Colorado
    Posts
    63

    Default Sprinker Valve Question

    I am mechanically challenged and need pull my sprinkler valves apart because they are auto filling my ballast tanks. Does anybody have a schematic or a website I could go to that diagrams the valves? I am trying to see what it looks like inside before I pull it apart. I know I saw some old post about cleaning algae and other debris out of it. Thank you in advance for the help!
    08 LSV, Perfect Pass, Grav III, 325 Indmar Assault and I love it!

  2. #2
    Join Date
    Aug 2009
    Location
    Montana
    Posts
    3,062

    Default

    There really isn't much too them. I think 6 screws to pull the valve apart and there will be a rubber flap in there?? I've had mine apart a few times trying to fix. The selenoid can be unscrewed and there will be a spring in there that you need to watch for. I tried several times to repair mine and ended up putting a new one in for $12 from Home Depot or Lowes. Worked for a day and now it's auto filling. They are junk in my opinion. I need a new solution!

    2007 Moomba Outback - going, going, GONE
    2015 "NOT A MOOMBA"

    Why Not? Play Hard! Get wet

  3. #3

    Default

    I think there is about 8 screws on top, but once u get it apart u will see its super ez to figure out. I pulled mine apart and it all looked fine, but still leaked so went and picked up a new one at lowes for like 13 bux solved my problem.

  4. #4
    Join Date
    Sep 2009
    Location
    Copperas Cove, TX
    Posts
    1,761

    Default

    Replace them with the Irritrol 700 valve. The Orbit valves at Lowes and Home Depot are up and over valves whereas the Irritrol is a straight thru
    Last edited by you da man; 09-01-2010 at 03:34 PM.

  5. #5
    Join Date
    Aug 2008
    Location
    Cottage Grove, MN
    Posts
    780

    Default

    Do the Irritrol valves have a similar on/off switch to prevent filling without the switch on?
    2006 Outback V - Gone
    2008 LSV - Gone
    2013 other brand

  6. #6
    Join Date
    Aug 2010
    Location
    Colorado
    Posts
    63

    Default

    You da man, yes per your previous instructions all of the valves are set to off, but the back two tanks are still filling auto filling.
    08 LSV, Perfect Pass, Grav III, 325 Indmar Assault and I love it!

  7. #7
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    Try to break it so you have to buy an Irritrol 700 series valve instead.
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  8. #8
    Join Date
    Aug 2010
    Location
    Colorado
    Posts
    63

    Default

    Hey Kane boats, on a serious note is it worth just pulling all the valves and upgrading them. I not really into dealing with faulty valves.
    08 LSV, Perfect Pass, Grav III, 325 Indmar Assault and I love it!

  9. #9
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    Jesse C has instructions on the irritol valves in his how to section.

    https://forum.moomba.com/showthread....hlight=ballast
    Last edited by jmvotto; 09-01-2010 at 04:05 PM.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  10. #10
    Join Date
    Aug 2010
    Location
    Colorado
    Posts
    63

    Default

    Thanks everyone, it looks like I am going to be replacing some sprinkler valves this weekend, Irritrol 700 here I come.
    08 LSV, Perfect Pass, Grav III, 325 Indmar Assault and I love it!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •