Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 25
  1. #11
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    5,456

    Default

    This video shows a great example of the duckbill check valve in a vented loop. http://www.youtube.com/watch?v=kZLTz4O2xLk

    Welcome to the forums. You have a 24v what?
    So when is this "old enough to know better" supposed to kick in?

    2001 MobiusV - Slightly Modified...

  2. #12

    Default

    Thanks

    It's an 06 supra 24 V sunsport I'm a member over on the supra forum but they don't have near the same amount of information.

  3. #13
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    5,456

    Default

    No problem - always happy to help, and YES we have a very active forum on the Moomba side with a lot of great how-to information and lively discussion.

    I went through a full blown ballast install myself last spring and used some of the tips from this thread as well as advice from many other members on here as well. The post of my how-to on that project as well as ballast upgrade projects done by others has mostly likely has landed in the archive by now.

    You may try combing through there for some ideas if you aren't seeing anything in the active forum threads.
    So when is this "old enough to know better" supposed to kick in?

    2001 MobiusV - Slightly Modified...

  4. #14
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    Supra members that frequent the Moomba forum are required to first mail berg $50 and/or a 12 pk of a local craft brewed beer.

    Welcome to the ghetto!

  5. #15
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    5,456

    Default

    Dammit Drew you're going to scare another one away! That'll be the 22nd one this month alone.



    Here's a starting point for the archives - https://forum.moomba.com/archive/index.php
    So when is this "old enough to know better" supposed to kick in?

    2001 MobiusV - Slightly Modified...

  6. #16

    Default

    I've been around these forums to long to be scared off that easy.

    I think I'm just going to added two more 800 attwoods to fill the rear 800's I just bought
    And leave the other pump and sprinkler valve to fill the 1100.

  7. #17
    Join Date
    Jun 2008
    Location
    Henderson, NV
    Posts
    7,020

    Default

    Quote Originally Posted by wolfeman131 View Post
    Supra members that frequent the Moomba forum are required to first mail berg $50 and/or a 12 pk of a local craft brewed beer.

    Welcome to the ghetto!
    glad I got on here before berg and wolf got that rule enacted
    '06 Supra Launch 20SSV-gone but never forgotten

  8. #18
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    5,456

    Default

    Yes, i almost forgot. Will that be cash, check or microbrew?
    So when is this "old enough to know better" supposed to kick in?

    2001 MobiusV - Slightly Modified...

  9. #19
    Join Date
    Sep 2010
    Location
    Austin, TEXAS
    Posts
    332

    Default

    Im not quite sure how the OP made the vented loop.. he said he used a check valve in the top, but I'm confused as to what the vented loop looks like or how he made it.
    08 Outback. Private Lake Owner.

  10. #20
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    5,456

    Default

    I gave up trying to figure out how to make one. They average about $45 ea for 1". However I lucked out on ebay and picked up 3 of them for $45 total. Keep looking - they're out there.

    Something to consider - 3/4" is much smaller/easier to work with and cheaper to buy.
    So when is this "old enough to know better" supposed to kick in?

    2001 MobiusV - Slightly Modified...

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •