Results 1 to 3 of 3
Thread: Flush Kit Questions
-
09-05-2004, 10:17 AM #1Junior Member
- Join Date
- Feb 2004
- Posts
- 3
Flush Kit Questions
What exactly comprises the Moomba "Flush Kit"? I am assuming it is a Perko in-line flush valve, but is it more? Where does it mount? I saw a post here that it mounts after the trans cooler, but it seems to me it should go in front of the raw water pump, or else it will run dry.
Any help/advise will be greatly appreciated.
John
-
09-09-2004, 08:53 PM #2Junior Member
- Join Date
- Aug 2004
- Posts
- 12
Replying to Topic 'Flush Kit Questions'
Yes, it is just the Perko inline flush kit. On my V-drive you simply cut the incoming hose from the raw water intake prior to the V-drive and splice it in there, thats all there is to it.
-
09-16-2004, 02:53 PM #3
Replying to Topic 'Flush Kit Questions'
Exactly how is the flush kit used?
What does it do. I thought it would be like the suction cup clamp thing you hook to a water hose to clean out the lake water after you remove the boat from the lake.
ClarkClark
2017 Moomba Craz
Raptor 400
Pacific Blue / Graphite
1st - 1983 old brown boat - not sure the make
2nd - 2001 Bayliner 185 4 cyl. Sold
3rd - 2005 Moomba Möbius LSV. Sold
Similar Threads
-
How do you flush manifolds?
By TL7 in forum General ChatReplies: 0Last Post: 04-17-2008, 11:40 PM -
Perko Flush Kit
By TL7 in forum General ChatReplies: 0Last Post: 07-30-2007, 11:18 PM -
fresh water flush kit
By bamwakeboarder in forum Service & RepairReplies: 2Last Post: 03-18-2007, 10:23 PM -
Flush Pro install...
By 04OUTBACK in forum Service & RepairReplies: 6Last Post: 12-28-2006, 02:36 PM -
flush kit
By Kent and Carol in forum Sales & InformationReplies: 6Last Post: 01-23-2004, 04:59 PM