Results 1 to 10 of 11
-
08-17-2010, 01:15 AM #1Junior Member
- Join Date
- May 2007
- Posts
- 29
Gel coat repair or fiberglass repair
So over the weekend a storm came in and I didnt have my boat properly bumpered. Here are the results. I searched for info on how to self fix but have a few questions... Do i need to put fiberglass in there or is gel coat enough. Do I void my hull warranty by DIY measures? Approximately how much would it be to have it fixed so when I get estimates I know ball park figures? When I woke up and saw this I was lucky not to throw up! Could be worse I guess?
ottawarider
-
08-17-2010, 01:36 AM #2
Ouch!
Where are you located?
Ottawa, Canada?2008 Outback V - gravity III ballasts, perfect pass star gazer, hydraulic wake plate, depth finder, water stainer, rad-a-cage tower, board racks, tower mirror, bimini top, audio package d, graphics package e, appearance package, cockpit & tonneau cover, mooring cover, black stainless rubrail, docking lights, OJ 14.25x14.0 prop.
Toys: Ronix Viva 136 with Kai bindings, Phase5 Drew Danielo Pro, Straight Line Sumo Sac 750lb, 450lb, 125lb ballast.
-
08-17-2010, 10:38 AM #3Senior Member
- Join Date
- Apr 2010
- Location
- saskatchewan, canada
- Posts
- 334
you can do it yourself, just buy the matching gel coat repair kit and follow the instructions. But to have somebody else fix it, I have no idea how much it would cost.
-
08-17-2010, 11:16 AM #4Senior Member
- Join Date
- Jun 2010
- Location
- Lake Houston
- Posts
- 656
WHere would you get this?
2013 LSV
2005 LSV - SOLD
-
08-17-2010, 12:00 PM #5
-
08-17-2010, 12:26 PM #6Junior Member
- Join Date
- May 2007
- Posts
- 29
Thanks all I'll be sure to post some pics of how it went. Ya I am from Ottawa Canada. Primarily ride in the Rideau River at Ecolands.
ottawarider
-
08-17-2010, 02:51 PM #7
holy sh** i can feel your pain.
I bought 8 more taylor made docking buoys last week-end because now i got my own dock . With a total of 10, you can barely see the dock behind the buoys...Last edited by MartinCaron; 08-17-2010 at 03:01 PM.
____________
03 Mobius LSV
-
08-17-2010, 10:04 PM #82008 Outback V - gravity III ballasts, perfect pass star gazer, hydraulic wake plate, depth finder, water stainer, rad-a-cage tower, board racks, tower mirror, bimini top, audio package d, graphics package e, appearance package, cockpit & tonneau cover, mooring cover, black stainless rubrail, docking lights, OJ 14.25x14.0 prop.
Toys: Ronix Viva 136 with Kai bindings, Phase5 Drew Danielo Pro, Straight Line Sumo Sac 750lb, 450lb, 125lb ballast.
-
08-17-2010, 11:10 PM #9
Ouch, bet that was a shocker.
www.spectrumcolor.com has gelcoat repair and paint kits for moomba's i had the kid at the gas dock forge to tie the stern properly and got i few dings that i repaired. pretty easy but a little time consuming.
I also had a deep scratch under my moomba decal when i brought the boat in to hot and the trailer was too deep and snapped the abs boat guidesand the metal pole dug in pretty good. i was taking it out for year end and the dealer fixed it like new for $250.00. can't even find the scratch.
a good gel coat guy will match colors perfectly and make it good as new. otherwise DIY will get it much much better than it is now.
my .02A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
08-18-2010, 07:09 PM #10Junior Member
- Join Date
- May 2007
- Posts
- 29