Results 1 to 6 of 6
Thread: Exhaust extension into jetwash?
-
08-15-2010, 07:09 PM #1Junior Member
- Join Date
- Jul 2010
- Location
- Saskatchewan, Canada
- Posts
- 28
Exhaust extension into jetwash?
Has anyone tried some stainless steel extensions to come out and tip down at a 45 degree or even connect together and point into jet wash?
I saw a design somewhere on the internet but it was hideous!
The idea would allow the exhaust to enter into jetwash and come up further away from boat (behind surfer!).
I am going to look into something this off season that does not interfere with wakelate or performance/drag but any ideas would be appreciated.
Come spring 2011 I will post my findings of whatever I design with breakdown of installation/costs. Thanks.
-
08-15-2010, 07:15 PM #2Junior Member
- Join Date
- Jul 2010
- Location
- Saskatchewan, Canada
- Posts
- 28
Sorry,
More research and i found that fresh air exhaust thread.
I still might make my own as I think a one piece unit will work nicely. Sorry to waste anyone's time.
http://www.FreshAirExhaust.com/
-
08-15-2010, 10:34 PM #3Senior Member
- Join Date
- Jan 2008
- Location
- Pensacola, FL
- Posts
- 1,585
Maybe call it prop wash.
Jet Wash is what they use to wash jets.1997 MasterCraft 205
2008 Moomba Outback
1999 MasterCraft Sportstar OB
1992 MasterCraft 205
1999 Malibu Response LX
1987 Marlin Magnum Skier
-
08-16-2010, 12:36 AM #4
This what you are talking about, only making it in stainless steel?
2007 Outback - SOLD June 2016
2012 RAM Crew Cab
2015 Subaru Forester
Stuart
"When you first start out with something new, you're always a little uptight." - Don Rickles
-
08-16-2010, 05:34 PM #5Senior Member
- Join Date
- Aug 2007
- Location
- Toronto, Ontario
- Posts
- 187
Last month I spent about 5 hours installing the FAE. I hope I did it correctly, but it seemed to ruin my slalom wake and didn't make much of a difference to engine noise.
After a few days, I removed.
It's still good and I would be happy to part with it.2007 Moomba Outback
99.999% Slalom, 0.001% Wakeboarding
-
08-16-2010, 05:43 PM #6Senior Member
- Join Date
- Oct 2007
- Location
- Panama City Florida
- Posts
- 1,798